Access--2#sho
Access--2#show run
Building configuration...

Current configuration : 3133 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Access--2
!
enable secret 5 $1$p6Ay$/SpMLosUcy2fIcpORwfi//
!
ip subnet-zero
!
!
aaa new-model
!
!
aaa group server radius rad_eap
 server 10.10.1.145 auth-port 1812 acct-port 1813
!
aaa group server radius rad_mac
!
aaa group server radius rad_acct
!
aaa group server radius rad_admin
!
aaa group server tacacs+ tac_admin
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa group server radius Infrastructure
 server 10.10.1.145 auth-port 1812 acct-port 1813
!
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authentication login method_Infrastructure group Infrastructure
aaa authorization exec default local 
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
!
dot11 ssid CiscoSystem
   authentication open 
   guest-mode
!
dot11 network-map
!
!
username Cisco privilege 15 password 7 00271A150754
!
bridge irb
!
!
interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption key 1 size 40bit 7 AF156E346C96 transmit-key
 encryption mode wep mandatory 
 !
 ssid CiscoSystem
 !
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface FastEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
 hold-queue 160 in
!
interface BVI1
 ip address 10.10.1.145 255.255.255.0
 no ip route-cache
!
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1 
!
snmp-server view iso iso included
snmp-server view dot11view ieee802dot11 included
snmp-server view ieee802dot11 ieee802dot11 included
snmp-server community public view iso RO
snmp-server location Bedtop
snmp-server chassis-id Access--2
snmp-server enable traps disassociate
snmp-server enable traps deauthenticate
snmp-server enable traps authenticate-fail
snmp-server enable traps rogue-ap
snmp-server enable traps syslog
snmp-server host 10.10.1.135 public  disassociate deauthenticate authenticate-fail rogue-ap syslog
radius-server local
  no authentication eapfast
  no authentication mac
  nas 10.10.1.145 key 7 1406050E1E1033
  user Cisco nthash 7 0026452350085E575673181B514D5C34402958257379710E67147B43244E5A5507
  user tahirjamil nthash 7 144F4B5F55567C7F7D79616707325E44575477000E70055A2041437A0A72000B70
!
radius-server attribute 32 include-in-access-req format %h
radius-server host 10.10.1.145 auth-port 1812 acct-port 1813 key 7 15031C09163E32
radius-server vsa send accounting
!
control-plane
!
bridge 1 route ip
!
!
wlccp authentication-server infrastructure method_Infrastructure
wlccp wds priority 254 interface BVI1
!
line con 0
line vty 0 4
!
end

Access--2# 
Access--2#
Access--2#
Access--2#
Access--2#wr
Building configuration...
[OK]