# telnet 10.1.63.1 Trying 10.1.63.1... Connected to 10.1.63.1. Escape character is '^]'. User Access Verification Password: TK_PDSN#1>en Password: TK_PDSN#1# TK_PDSN#1# TK_PDSN#1# TK_PDSN#1#sh ver TK_PDSN#1#sh version Cisco IOS Software, 7200 Software (C7200-C6IS-M), Version 12.3(14)YX4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Wed 18-Oct-06 13:53 by hqluong ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2) BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(7c), RELEASE SOFTWARE (fc1) TK_PDSN#1 uptime is 6 weeks, 6 days, 19 hours, 46 minutes System returned to ROM by error - a Software forced crash, PC 0x60A00A04 at 19:41:00 indones Fri Sep 19 2008 System restarted at 19:22:57 indones Fri Sep 19 2008 System image file is "disk0:c7200-c6is-mz.123-14.YX4.bin" Cisco 7206VXR (NPE400) processor (revision A) with 491520K/32768K bytes of memory. Processor board ID 26807961 R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2 Cache 6 slot VXR midplane, Version 2.6 Last reset from watchdog reset PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points. Current configuration on bus mb0_mb1 has a total of 600 bandwidth points. This configuration is within the PCI bus capacity and is supported. PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points. Current configuration on bus mb2 has a total of 200 bandwidth points This configuration is within the PCI bus capacity and is supported. Please refer to the following document "Cisco 7200 Series Port Adaptor Hardware Configuration Guidelines" on CCO , for c7200 bandwidth points oversubscription/usage guidelines. 4 FastEthernet interfaces 125K bytes of NVRAM. 46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 125440K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes). 8192K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2102 TK_PDSN#1# TK_PDSN#1#telnet 10.1.63.5 Trying 10.1.63.5 ... Open User Access Verification Password: TK_PDSN#2>en Password: TK_PDSN#2#sh versi TK_PDSN#2#sh version Cisco IOS Software, 7200 Software (C7200-C6IS-M), Version 12.3(11)YF4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Wed 31-Aug-05 21:58 by evmiller ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2) BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(7c), RELEASE SOFTWARE (fc1) TK_PDSN#2 uptime is 3 weeks, 1 day, 3 hours, 6 minutes System returned to ROM by bus error at PC 0x608C734C, address 0xAB1234CE at 12:14:09 indones Thu Oct 16 2008 System restarted at 12:15:43 indones Thu Oct 16 2008 System image file is "disk0:c7200-c6is-mz.123-11.YF4.bin" Cisco 7206VXR (NPE400) processor (revision A) with 491520K/32768K bytes of memory. Processor board ID 28341712 R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2 Cache 6 slot VXR midplane, Version 2.6 Last reset from watchdog reset PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points. Current configuration on bus mb0_mb1 has a total of 600 bandwidth points. This configuration is within the PCI bus capacity and is supported. PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points. Current configuration on bus mb2 has a total of 200 bandwidth points. This configuration is within the PCI bus capacity and is supported. Please refer to the following document "Cisco 7200 Series Port Adaptor Hardware Configuration Guidelines" on CCO , for c7200 bandwidth points oversubscription/usage guidelines. 4 FastEthernet interfaces 125K bytes of NVRAM. 47040K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 125440K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes). 8192K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2102 TK_PDSN#2# TK_PDSN#2#telnet 10.1.63.9 Trying 10.1.63.9 ... Open User Access Verification Password: % Authentication failed Password: % Authentication failed Password: TK_PDSN#3>en Password: TK_PDSN#3#sh vers TK_PDSN#3#sh version Cisco IOS Software, 7200 Software (C7200-C6IS-M), Version 12.3(11)YF4, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Wed 31-Aug-05 21:58 by evmiller ROM: System Bootstrap, Version 12.2(4r)B2, RELEASE SOFTWARE (fc2) BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(7c), RELEASE SOFTWARE (fc1) TK_PDSN#3 uptime is 1 year, 16 weeks, 3 days, 12 hours, 47 minutes System returned to ROM by reload at 02:19:57 indones Mon Jul 16 2007 System restarted at 02:07:29 indones Mon Jul 16 2007 System image file is "disk0:c7200-c6is-mz.123-11.YF4.bin" Cisco 7206VXR (NPE400) processor (revision A) with 491520K/32768K bytes of memory. Processor board ID 29554434 R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2 Cache 6 slot VXR midplane, Version 2.7 Last reset from power-on PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points. Current configuration on bus mb0_mb1 has a total of 600 bandwidth points. This configuration is within the PCI bus capacity and is supported. PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points. Current configuration on bus mb2 has a total of 200 bandwidth points. This configuration is within the PCI bus capacity and is supported. Please refer to the following document "Cisco 7200 Series Port Adaptor Hardware Configuration Guidelines" on CCO , for c7200 bandwidth points oversubscription/usage guidelines. 4 FastEthernet interfaces 125K bytes of NVRAM. 125952K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes). 8192K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x2102