Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(15)XY1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Tue 12-Feb-08 00:37 by prod_rel_team
 
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
 
scm_dialout_r01 uptime is 2 days, 21 hours, 41 minutes
System returned to ROM by reload at 11:57:49 UTC Mon Jun 9 2008
System image file is "flash:c2800nm-ipbase-mz.124-15.XY1.bin"
 
Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FHK1220F3Y9
2 FastEthernet interfaces
31 Serial interfaces
24 terminal lines
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
 
Configuration register is 0x2102
  
scm_dialout_r01#sh modem version 
Slot 0:
PVDM 0: PVDMII-24DM - HW Version 1, FPGA Version 3.3, NiOS(2) 5.0.1
 Modem 0/322-0/333:
    PCI Classid: 0x07800001 Bootrom Rev: 0x00005601 Diag Result: 0x0000007F
    Firmware: V3_10
 Modem 0/334-0/345:
    PCI Classid: 0x07800001 Bootrom Rev: 0x00005601 Diag Result: 0x0000007F
    Firmware: V3_10


line 0/322 0/345
 exec-timeout 0 0
 login authentication dial
 modem DTR-active
 modem autoconfigure type mica
 rotary 1
 no exec
 transport preferred telnet
 transport input all