R3#sh run Building configuration... Current configuration : 2445 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R3 ! boot-start-marker boot-end-marker ! logging buffered 4096 debugging no logging console ! no aaa new-model memory-size iomem 5 ! ! ip cef ! ! ip vrf VPN rd 1:1 route-target export 1:1 route-target import 1:1 ! mpls label protocol ldp mpls traffic-eng tunnels mpls traffic-eng reoptimize timers frequency 10 ! ! ! ! ! interface Loopback0 ip address 150.1.3.3 255.255.255.255 ! interface Tunnel0 ip unnumbered Loopback0 tunnel destination 150.1.4.4 tunnel mode mpls traffic-eng tunnel mpls traffic-eng autoroute announce tunnel mpls traffic-eng priority 7 7 tunnel mpls traffic-eng bandwidth 3333 tunnel mpls traffic-eng path-option 1 explicit name TEST no routing dynamic ! interface Ethernet0/0 ip vrf forwarding VPN ip address 10.1.37.3 255.255.255.0 half-duplex ! interface Ethernet0/1 ip address 192.10.1.3 255.255.255.0 half-duplex ! interface Ethernet0/2 no ip address shutdown half-duplex ! interface Ethernet0/3 no ip address shutdown half-duplex ! interface Serial1/0 no ip address shutdown serial restart-delay 0 ! interface Serial1/1 no ip address shutdown serial restart-delay 0 ! interface Serial1/2 bandwidth 155000 ip address 150.1.13.3 255.255.255.0 mpls ip mpls traffic-eng tunnels serial restart-delay 0 ip rsvp bandwidth 155000 155000 ! interface Serial1/3 no ip address shutdown serial restart-delay 0 ! router ospf 1 mpls traffic-eng router-id Loopback0 mpls traffic-eng area 0 router-id 150.1.3.3 log-adjacency-changes network 150.1.3.3 0.0.0.0 area 0 network 150.1.13.3 0.0.0.0 area 0 ! router bgp 1 no bgp default ipv4-unicast bgp log-neighbor-changes neighbor 10.1.37.3 remote-as 2 neighbor 150.1.4.4 remote-as 1 neighbor 150.1.4.4 update-source Loopback0 ! address-family vpnv4 neighbor 150.1.4.4 activate neighbor 150.1.4.4 send-community extended neighbor 150.1.4.4 next-hop-self exit-address-family ! address-family ipv4 vrf VPN neighbor 10.1.37.7 remote-as 2 neighbor 10.1.37.7 activate no synchronization exit-address-family ! ip http server ! ! ip explicit-path name TEST enable next-address 150.1.13.1 next-address 150.1.12.2 next-address 150.1.25.5 next-address 150.1.45.4 next-address 150.1.4.4 ! ip pim rp-address 150.1.255.255 ! ! ! control-plane ! ! line con 0 line aux 0 line vty 0 4 login ! end R3# R3#sh ip cef vrf VPN 10.1.8.8 255.255.255.255 10.1.8.8/32, version 8, epoch 0 0 packets, 0 bytes tag information set local tag: VPN-route-head fast tag rewrite with Recursive rewrite via 150.1.4.4/32, tags imposed {23} via 150.1.4.4, 0 dependencies, recursive next hop 150.1.4.4, Tunnel0 via 150.1.4.4/32 valid adjacency tag rewrite with Recursive rewrite via 150.1.4.4/32, tags imposed {23} R3# R3# R3#sh mpls for Local Outgoing Prefix Bytes tag Outgoing Next Hop tag tag or VC or Tunnel Id switched interface 16 Pop tag 150.1.12.0/24 0 Se1/2 point2point 17 Pop tag 150.1.1.1/32 0 Se1/2 point2point 18 16 150.1.2.2/32 0 Se1/2 point2point 19 17 150.1.24.0/24 0 Se1/2 point2point 20 18 150.1.25.0/24 0 Se1/2 point2point 21 Untagged 10.1.7.7/32[V] 0 Et0/0 10.1.37.7 22 22 150.1.5.5/32 0 Se1/2 point2point 23 23 150.1.45.0/24 0 Se1/2 point2point 24 Untagged[T] 150.1.4.4/32 0 Tu0 point2point [T] Forwarding through a TSP tunnel. View additional tagging info with the 'detail' option R3# R3# R3# R3#sh mpls traff R3#sh mpls traffic-eng tun Name: R3_t0 (Tunnel0) Destination: 150.1.4.4 Status: Admin: up Oper: up Path: valid Signalling: connected path option 1, type explicit TEST (Basis for Setup, path weight 5) Config Parameters: Bandwidth: 3333 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF Metric Type: TE (default) AutoRoute: enabled LockDown: disabled Loadshare: 3333 bw-based auto-bw: disabled InLabel : - OutLabel : Serial1/2, 25 RSVP Signalling Info: Src 150.1.3.3, Dst 150.1.4.4, Tun_Id 0, Tun_Instance 52 RSVP Path Info: My Address: 150.1.3.3 Explicit Route: 150.1.13.1 150.1.12.1 150.1.12.2 150.1.25.5 150.1.45.4 150.1.4.4 Record Route: NONE Tspec: ave rate=3333 kbits, burst=1000 bytes, peak rate=3333 kbits RSVP Resv Info: Record Route: NONE Fspec: ave rate=3333 kbits, burst=1000 bytes, peak rate=3333 kbits History: Tunnel: Time since created: 16 minutes, 53 seconds Time since path change: 10 minutes, 28 seconds Current LSP: Uptime: 10 minutes, 28 seconds Prior LSP: ID: path option 1 [48] Removal Trigger: path verification failed LSP Tunnel R4_t0 is signalled, connection is up InLabel : Serial1/2, implicit-null OutLabel : - RSVP Signalling Info: Src 150.1.4.4, Dst 150.1.3.3, Tun_Id 0, Tun_Instance 48 RSVP Path Info: My Address: 150.1.3.3 Explicit Route: NONE Record Route: NONE Tspec: ave rate=3333 kbits, burst=1000 bytes, peak rate=3333 kbits RSVP Resv Info: Record Route: NONE Fspec: ave rate=3333 kbits, burst=1000 bytes, peak rate=3333 kbits R3#