cisco2801>en cisco2801#sh run Building configuration... Current configuration : 2270 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname cisco2801 ! boot-start-marker boot-end-marker ! ! no aaa new-model network-clock-participate wic 3 ip cef ! ! ! ! multilink bundle-name authenticated ! ! voice-card 0 ! ! ! voice service voip allow-connections sip to sip ! ! ! ! ! ! ! ! ! ! ! ! voice source-group DE_CCM access-list 70 translation-profile incoming DE_CCM ! voice source-group DE_GWEKT access-list 71 translation-profile incoming DE_GWEKT ! voice translation-rule 70 rule 1 /^/ /D00/ ! voice translation-rule 71 rule 1 /^/ /D01/ ! voice translation-rule 80 rule 1 /^D00/ // ! voice translation-rule 81 rule 1 /^D01/ // ! ! voice translation-profile A_CCM translate called 81 ! voice translation-profile A_GWEKT translate called 80 ! voice translation-profile DE_CCM translate called 70 ! voice translation-profile DE_GWEKT translate called 71 ! ! ! ! ! ! archive log config hidekeys ! ! ! ! ! ! interface FastEthernet0/0 ip address 172.16.44.85 255.255.255.0 duplex auto speed auto ! interface Service-Engine0/1 no ip address shutdown ! interface FastEthernet0/1 ip address 10.4.0.3 255.255.128.0 duplex auto speed auto ! interface BRI0/3/0 no ip address ! interface BRI0/3/1 no ip address ! ip route 212.55.27.58 255.255.255.255 172.16.44.80 ! ! no ip http server no ip http secure-server ! access-list 70 permit 10.4.0.12 access-list 71 permit 212.55.27.58 ! ! ! control-plane ! ! ! voice-port 0/1/0 ! voice-port 0/1/1 ! voice-port 0/2/0 ! voice-port 0/2/1 ! voice-port 0/3/0 ! voice-port 0/3/1 ! ! ! ! ! dial-peer voice 2000 voip description A_CCM translation-profile outgoing A_CCM service session destination-pattern D01T session protocol sipv2 session target ipv4:10.4.0.12 incoming called-number D00 no vad ! dial-peer voice 3000 voip description A_GWEKT translation-profile outgoing A_GWEKT service session destination-pattern D00T session protocol sipv2 session target ipv4:212.55.27.58 incoming called-number D01 no vad ! ! ! line con 0 line aux 0 line 130 no activation-character no exec transport preferred none transport input all transport output all line vty 0 4 login ! scheduler allocate 20000 1000 end cisco2801#