<http://www.linksys.com> 	Firmware Version: 1.00.04.c  


      Voice

	

*Wireless-G Broadband Router with 2 Phone Ports  ***

	

*WRP400*

 

* Setup </index.asp>***

	

* Wireless </Wireless_Basic.asp>***

	

* Security </Firewall.asp>***

	

* Access Restrictions </Filters.asp>***

	

* Applications
&Gaming </SingleForward.asp>***

	

* Administration </Management.asp>***

	

* Status </Status_Router.asp>***

	

* Voice*


    Info <#>


    System <#>


    SIP <#>


    Provisioning <#>


    Regional <#>


    Line 1 <#>


    Line 2 <#>


    User 1 <#>


    User 2 <#>

User Login </voice/>    

	
Product Information	 	 				
		Product Name:	WRP400	Serial Number:	CR301H508666
		Software Version:	1.00.04.c	Hardware Version:	1.00.01
		Voice Module Version:	1.0.10(20080103k)	MAC Address:	002129090891
		Client Certificate:	Installed	Customization:	Open
System Status	 	 				
		Current Time:	9/6/2009 12:06:42	Elapsed Time:	00:00:18
		RTP Packets Sent:	0	RTP Bytes Sent:	0
		RTP Packets Recv:	0	RTP Bytes Recv:	0
		SIP Messages Sent:	3	SIP Bytes Sent:	1534
		SIP Messages Recv:	3	SIP Bytes Recv:	1399
		External IP:	88.85.6.194		
Line 1 Status	 	 				
		Hook State:	On	Registration State:	Not Registered
		Last Registration At:		Next Registration In:	
		Message Waiting:	No	Call Back Active:	No
		Last Called Number:		Last Caller Number:	
		Mapped SIP Port:			
		Call 1 State:	Idle	Call 2 State:	Idle
		Call 1 Tone:	None	Call 2 Tone:	None
		Call 1 Encoder:		Call 2 Encoder:	
		Call 1 Decoder:		Call 2 Decoder:	
		Call 1 FAX:		Call 2 FAX:	
		Call 1 Type:		Call 2 Type:	
		Call 1 Remote Hold:		Call 2 Remote Hold:	
		Call 1 Callback:		Call 2 Callback:	
		Call 1 Peer Name:		Call 2 Peer Name:	
		Call 1 Peer Phone:		Call 2 Peer Phone:	
		Call 1 Duration:		Call 2 Duration:	
		Call 1 Packets Sent:		Call 2 Packets Sent:	
		Call 1 Packets Recv:		Call 2 Packets Recv:	
		Call 1 Bytes Sent:		Call 2 Bytes Sent:	
		Call 1 Bytes Recv:		Call 2 Bytes Recv:	
		Call 1 Decode Latency:		Call 2 Decode Latency:	
		Call 1 Jitter:		Call 2 Jitter:	
		Call 1 Round Trip Delay:		Call 2 Round Trip Delay:	
		Call 1 Packets Lost:		Call 2 Packets Lost:	
		Call 1 Packet Error:		Call 2 Packet Error:	
		Call 1 Mapped RTP Port:		Call 2 Mapped RTP Port:	
		Call 1 Media Loopback:		Call 2 Media Loopback:	
Line 2 Status	 	 				
		Hook State:	On	Registration State:	Registered
		Last Registration At:	9/6/2009 13:06:24	Next Registration In:	3552 s
		Message Waiting:	No	Call Back Active:	No
		Last Called Number:		Last Caller Number:	
		Mapped SIP Port:	5061		
		Call 1 State:	Idle	Call 2 State:	Idle
		Call 1 Tone:	None	Call 2 Tone:	None
		Call 1 Type:		Call 2 Type:	
		Call 1 Encoder:		Call 2 Encoder:	
		Call 1 Decoder:		Call 2 Decoder:	
		Call 1 FAX:		Call 2 FAX:	
		Call 1 Remote Hold:		Call 2 Remote Hold:	
		Call 1 Callback:		Call 2 Callback:	
		Call 1 Peer Name:		Call 2 Peer Name:	
		Call 1 Peer Phone:		Call 2 Peer Phone:	
		Call 1 Duration:		Call 2 Duration:	
		Call 1 Packets Sent:		Call 2 Packets Sent:	
		Call 1 Packets Recv:		Call 2 Packets Recv:	
		Call 1 Bytes Sent:		Call 2 Bytes Sent:	
		Call 1 Bytes Recv:		Call 2 Bytes Recv:	
		Call 1 Decode Latency:		Call 2 Decode Latency:	
		Call 1 Jitter:		Call 2 Jitter:	
		Call 1 Round Trip Delay:		Call 2 Round Trip Delay:	
		Call 1 Packets Lost:		Call 2 Packets Lost:	
		Call 1 Packet Error:		Call 2 Packet Error:	
		Call 1 Mapped RTP Port:		Call 2 Mapped RTP Port:	
		Call 1 Media Loopback:		Call 2 Media Loopback:	

		 

System Configuration	 	 				
		Restricted Access Domains:	
		Enable Web Admin Access:		Admin Passwd:	
		User Password:			
Miscellaneous Settings	 	 				
		Syslog Server:		Debug Server:	
		Debug Level:			

		 

SIP Parameters	 	 				
		Max Forward:		Max Redirection:	
		Max Auth:		SIP User Agent Name:	
		SIP Server Name:		SIP Reg User Agent Name:	
		SIP Accept Language:		DTMF Relay MIME Type:	
		Remove Last Reg:		Use Compact Header:	
		Escape Display Name:		RFC 2543 Call Hold:	
		Mark All AVT Packets:		SIP TCP Port Min:	
		SIP TCP Port Max:			
SIP Timer Values (sec)	 	 				
		SIP T1:		SIP T2:	
		SIP T4:		SIP Timer B:	
		SIP Timer F:		SIP Timer H:	
		SIP Timer D:		SIP Timer J:	
		INVITE Expires:		ReINVITE Expires:	
		Reg Min Expires:		Reg Max Expires:	
		Reg Retry Intvl:		Reg Retry Long Intvl:	
Response Status Code Handling	 	 				
		SIT1 RSC:		SIT2 RSC:	
		SIT3 RSC:		SIT4 RSC:	
		Try Backup RSC:		Retry Reg RSC:	
RTP Parameters	 	 				
		RTP Port Min:		RTP Port Max:	
		RTP Packet Size:		Max RTP ICMP Err:	
		RTCP Tx Interval:		No UDP Checksum:	
		Stats In BYE:			
SDP Payload Types	 	 				
		NSE Dynamic Payload:		AVT Dynamic Payload:	
		INFOREQ Dynamic Payload:		G726r32 Dynamic Payload:	
		G729b Dynamic Payload:		EncapRTP Dynamic Payload:	
		RTP-Start-Loopback Dynamic Payload:		RTP-Start-Loopback Codec:	
		NSE Codec Name:		AVT Codec Name:	
		G711u Codec Name:		G711a Codec Name:	
		G726r32 Codec Name:		G729a Codec Name:	
		G729b Codec Name:		EncapRTP Codec Name:	
NAT Support Parameters	 	 				
		Handle VIA received:		Handle VIA rport:	
		Insert VIA received:		Insert VIA rport:	
		Substitute VIA Addr:		Send Resp To Src Port:	
		STUN Enable:		STUN Test Enable:	
		STUN Server:		EXT IP:	
		EXT RTP Port Min:		NAT Keep Alive Intvl:	

		 

Configuration Profile	 	 				
		Provision Enable:		Resync On Reset:	
		Resync Random Delay:		Resync Periodic:	
		Resync Error Retry Delay:		Forced Resync Delay:	
		Resync From SIP:		Resync After Upgrade Attempt:	
		Resync Trigger 1:	
		Resync Trigger 2:	
		Resync Fails On FNF:			
		Profile Rule:	
		Profile Rule B:	
		Profile Rule C:	
		Profile Rule D:	
		Profile Name:		Profile Region:	
		Log Resync Request Msg:	
		Log Resync Success Msg:	
		Log Resync Failure Msg:	
		Report Rule:	
Firmware Upgrade	 	 				
		Upgrade Enable:		Upgrade Error Retry Delay:	
		Downgrade Rev Limit:			
		Upgrade Rule:	
		Log Upgrade Request Msg:	
		Log Upgrade Success Msg:	
		Log Upgrade Failure Msg:	
		License Keys:	
General Purpose Parameters	 	 				
		GPP A:	
		GPP B:	
		GPP C:	
		GPP D:	
		GPP E:	
		GPP F:	
		GPP G:	
		GPP H:	
		GPP I:	
		GPP J:	
		GPP K:	
		GPP L:	
		GPP M:	
		GPP N:	
		GPP O:	
		GPP P:	

		 

Call Progress Tones	 	 				
		Dial Tone:	
		Second Dial Tone:	
		Outside Dial Tone:	
		Prompt Tone:	
		Busy Tone:	
		Reorder Tone:	
		Off Hook Warning Tone:	
		Ring Back Tone:	
		Ring Back 2 Tone:	
		Confirm Tone:	
		SIT1 Tone:	
		SIT2 Tone:	
		SIT3 Tone:	
		SIT4 Tone:	
		MWI Dial Tone:	
		Cfwd Dial Tone:	
		Holding Tone:	
		Conference Tone:	
		Secure Call Indication Tone:	
		Feature Invocation Tone:	
Distinctive Ring Patterns	 	 				
		Ring1 Cadence:		Ring2 Cadence:	
		Ring3 Cadence:		Ring4 Cadence:	
		Ring5 Cadence:		Ring6 Cadence:	
		Ring7 Cadence:		Ring8 Cadence:	
Distinctive Call Waiting Tone Patterns	 	 				
		CWT1 Cadence:		CWT2 Cadence:	
		CWT3 Cadence:		CWT4 Cadence:	
		CWT5 Cadence:		CWT6 Cadence:	
		CWT7 Cadence:		CWT8 Cadence:	
Distinctive Ring/CWT Pattern Names	 	 				
		Ring1 Name:		Ring2 Name:	
		Ring3 Name:		Ring4 Name:	
		Ring5 Name:		Ring6 Name:	
		Ring7 Name:		Ring8 Name:	
		Ring Waveform:		Ring Frequency:	
		Ring Voltage:		CWT Frequency:	
		Synchronized Ring:			
Control Timer Values (sec)	 	 				
		Hook Flash Timer Min:		Hook Flash Timer Max:	
		Callee On Hook Delay:		Reorder Delay:	
		Call Back Expires:		Call Back Retry Intvl:	
		Call Back Delay:		VMWI Refresh Intvl:	
		Interdigit Long Timer:		Interdigit Short Timer:	
		CPC Delay:		CPC Duration:	
Vertical Service Activation Codes	 	 				
		Call Return Code:		Call Redial Code:	
		Blind Transfer Code:		Call Back Act Code:	
		Call Back Deact Code:		Call Back Busy Act Code:	
		Cfwd All Act Code:		Cfwd All Deact Code:	
		Cfwd Busy Act Code:		Cfwd Busy Deact Code:	
		Cfwd No Ans Act Code:		Cfwd No Ans Deact Code:	
		Cfwd Last Act Code:		Cfwd Last Deact Code:	
		Block Last Act Code:		Block Last Deact Code:	
		Accept Last Act Code:		Accept Last Deact Code:	
		CW Act Code:		CW Deact Code:	
		CW Per Call Act Code:		CW Per Call Deact Code:	
		Block CID Act Code:		Block CID Deact Code:	
		Block CID Per Call Act Code:		Block CID Per Call Deact Code:	
		Block ANC Act Code:		Block ANC Deact Code:	
		DND Act Code:		DND Deact Code:	
		CID Act Code:		CID Deact Code:	
		CWCID Act Code:		CWCID Deact Code:	
		Dist Ring Act Code:		Dist Ring Deact Code:	
		Speed Dial Act Code:		Secure All Call Act Code:	
		Secure No Call Act Code:		Secure One Call Act Code:	
		Secure One Call Deact Code:		Conference Act Code:	
		Attn-Xfer Act Code:		Modem Line Toggle Code:	
		FAX Line Toggle Code:		Media Loopback Code:	
		Referral Services Codes:	
		Feature Dial Services Codes:	
Vertical Service Announcement Codes	 	 				
		Service Annc Base Number:			
		Service Annc Extension Codes:	
Outbound Call Codec Selection Codes	 	 				
		Prefer G711u Code:		Force G711u Code:	
		Prefer G711a Code:		Force G711a Code:	
		Prefer G726r32 Code:		Force G726r32 Code:	
		Prefer G729a Code:		Force G729a Code:	
Miscellaneous	 	 				
		Set Local Date (mm/dd):		Set Local Time (HH/mm):	
		Time Zone:		FXS Port Impedance:	
		Daylight Saving Time Rule:	
		FXS Port Input Gain:		FXS Port Output Gain:	
		DTMF Playback Level:		DTMF Playback Length:	
		Detect ABCD:		Playback ABCD:	
		Caller ID Method:		FXS Port Power Limit:	
		Caller ID FSK Standard:		Feature Invocation Method:	

		 

	
		Line Enable:			
Streaming Audio Server (SAS)	 	 				
		SAS Enable:		SAS DLG Refresh Intvl:	
		SAS Inbound RTP Sink:			
NAT Settings	 	 				
		NAT Mapping Enable:		NAT Keep Alive Enable:	
		NAT Keep Alive Msg:		NAT Keep Alive Dest:	
Network Settings	 	 				
		SIP ToS/DiffServ Value:		SIP CoS Value:	[0-7]
		RTP ToS/DiffServ Value:		RTP CoS Value:	[0-7]
		Network Jitter Level:		Jitter Buffer Adjustment:	
SIP Settings	 	 				
		SIP Transport:		SIP Port:	
		SIP 100REL Enable:		EXT SIP Port:	
		Auth Resync-Reboot:		SIP Proxy-Require:	
		SIP Remote-Party-ID:		SIP GUID:	
		SIP Debug Option:		RTP Log Intvl:	
		Restrict Source IP:		Referor Bye Delay:	
		Refer Target Bye Delay:		Referee Bye Delay:	
		Refer-To Target Contact:		Sticky 183:	
		Auth INVITE:		Reply 182 On Call Waiting:	
Call Feature Settings	 	 				
		Blind Attn-Xfer Enable:		MOH Server:	
		Xfer When Hangup Conf:		Conference Bridge URL:	
		Conference Bridge Ports:			
Proxy and Registration	 	 				
		Proxy:	
		Outbound Proxy:	
		Use Outbound Proxy:		Use OB Proxy In Dialog:	
		Register:		Make Call Without Reg:	
		Register Expires:		Ans Call Without Reg:	
		Use DNS SRV:		DNS SRV Auto Prefix:	
		Proxy Fallback Intvl:		Proxy Redundancy Method:	
		Voice Mail Server:		Mailbox Subscribe Expires:	
Subscriber Information	 	 				
		Display Name:		User ID:	
		Password:		Use Auth ID:	
		Auth ID:		Directory Number:	
		Mini Certificate:	
		SRTP Private Key:	
Supplementary Service Subscription	 	 				
		Call Waiting Serv:		Block CID Serv:	
		Block ANC Serv:		Dist Ring Serv:	
		Cfwd All Serv:		Cfwd Busy Serv:	
		Cfwd No Ans Serv:		Cfwd Sel Serv:	
		Cfwd Last Serv:		Block Last Serv:	
		Accept Last Serv:		DND Serv:	
		CID Serv:		CWCID Serv:	
		Call Return Serv:		Call Redial Serv:	
		Call Back Serv:		Three Way Call Serv:	
		Three Way Conf Serv:		Attn Transfer Serv:	
		Unattn Transfer Serv:		MWI Serv:	
		VMWI Serv:		Speed Dial Serv:	
		Secure Call Serv:		Referral Serv:	
		Feature Dial Serv:		Service Announcement Serv:	
Audio Configuration	 	 				
		Preferred Codec:		Silence Supp Enable:	
		Use Pref Codec Only:		Silence Threshold:	
		G729a Enable:		Echo Canc Enable:	
		Echo Canc Adapt Enable:		Echo Supp Enable:	
		FAX V21 Detect Enable:		G726-32 Enable:	
		FAX CNG Detect Enable:		FAX Passthru Codec:	
		DTMF Process INFO:		FAX Codec Symmetric:	
		DTMF Process AVT:		FAX Passthru Method:	
		DTMF Tx Method:		DTMF Tx Mode:	
		FAX Process NSE:		Hook Flash Tx Method:	
		FAX Disable ECAN:		Release Unused Codec:	
		FAX Enable T38:		FAX T38 Redundancy:	
		FAX Tone Detect Mode:			
Dial Plan	 	 				
		Dial Plan:	
		Enable IP Dialing:		Emergency Number:	
FXS Port Polarity Configuration	 	 				
		Idle Polarity:		Caller Conn Polarity:	
		Callee Conn Polarity:			

		 

	
		Line Enable:			
Streaming Audio Server (SAS)	 	 				
		SAS Enable:		SAS DLG Refresh Intvl:	
		SAS Inbound RTP Sink:			
NAT Settings	 	 				
		NAT Mapping Enable:		NAT Keep Alive Enable:	
		NAT Keep Alive Msg:		NAT Keep Alive Dest:	
Network Settings	 	 				
		SIP ToS/DiffServ Value:		SIP CoS Value:	[0-7]
		RTP ToS/DiffServ Value:		RTP CoS Value:	[0-7]
		Network Jitter Level:		Jitter Buffer Adjustment:	
SIP Settings	 	 				
		SIP Transport:		SIP Port:	
		SIP 100REL Enable:		EXT SIP Port:	
		Auth Resync-Reboot:		SIP Proxy-Require:	
		SIP Remote-Party-ID:		SIP GUID:	
		SIP Debug Option:		RTP Log Intvl:	
		Restrict Source IP:		Referor Bye Delay:	
		Refer Target Bye Delay:		Referee Bye Delay:	
		Refer-To Target Contact:		Sticky 183:	
		Auth INVITE:		Reply 182 On Call Waiting:	
Call Feature Settings	 	 				
		Blind Attn-Xfer Enable:		MOH Server:	
		Xfer When Hangup Conf:		Conference Bridge URL:	
		Conference Bridge Ports:			
Proxy and Registration	 	 				
		Proxy:	
		Outbound Proxy:	
		Use Outbound Proxy:		Use OB Proxy In Dialog:	
		Register:		Make Call Without Reg:	
		Register Expires:		Ans Call Without Reg:	
		Use DNS SRV:		DNS SRV Auto Prefix:	
		Proxy Fallback Intvl:		Proxy Redundancy Method:	
		Voice Mail Server:		Mailbox Subscribe Expires:	
Subscriber Information	 	 				
		Display Name:		User ID:	
		Password:		Use Auth ID:	
		Auth ID:		Directory Number:	
		Mini Certificate:	
		SRTP Private Key:	
Supplementary Service Subscription	 	 				
		Call Waiting Serv:		Block CID Serv:	
		Block ANC Serv:		Dist Ring Serv:	
		Cfwd All Serv:		Cfwd Busy Serv:	
		Cfwd No Ans Serv:		Cfwd Sel Serv:	
		Cfwd Last Serv:		Block Last Serv:	
		Accept Last Serv:		DND Serv:	
		CID Serv:		CWCID Serv:	
		Call Return Serv:		Call Redial Serv:	
		Call Back Serv:		Three Way Call Serv:	
		Three Way Conf Serv:		Attn Transfer Serv:	
		Unattn Transfer Serv:		MWI Serv:	
		VMWI Serv:		Speed Dial Serv:	
		Secure Call Serv:		Referral Serv:	
		Feature Dial Serv:		Service Announcement Serv:	
Audio Configuration	 	 				
		Preferred Codec:		Silence Supp Enable:	
		Use Pref Codec Only:		Silence Threshold:	
		G729a Enable:		Echo Canc Enable:	
		Echo Canc Adapt Enable:		Echo Supp Enable:	
		FAX V21 Detect Enable:		G726-32 Enable:	
		FAX CNG Detect Enable:		FAX Passthru Codec:	
		DTMF Process INFO:		FAX Codec Symmetric:	
		DTMF Process AVT:		FAX Passthru Method:	
		DTMF Tx Method:		DTMF Tx Mode:	
		FAX Process NSE:		Hook Flash Tx Method:	
		FAX Disable ECAN:		Release Unused Codec:	
		FAX Enable T38:		FAX T38 Redundancy:	
		FAX Tone Detect Mode:			
Dial Plan	 	 				
		Dial Plan:	
		Enable IP Dialing:		Emergency Number:	
FXS Port Polarity Configuration	 	 				
		Idle Polarity:		Caller Conn Polarity:	
		Callee Conn Polarity:			

		 

Call Forward Settings	 	 				
		Cfwd All Dest:		Cfwd Busy Dest:	
		Cfwd No Ans Dest:		Cfwd No Ans Delay:	
Selective Call Forward Settings	 	 				
		Cfwd Sel1 Caller:		Cfwd Sel1 Dest:	
		Cfwd Sel2 Caller:		Cfwd Sel2 Dest:	
		Cfwd Sel3 Caller:		Cfwd Sel3 Dest:	
		Cfwd Sel4 Caller:		Cfwd Sel4 Dest:	
		Cfwd Sel5 Caller:		Cfwd Sel5 Dest:	
		Cfwd Sel6 Caller:		Cfwd Sel6 Dest:	
		Cfwd Sel7 Caller:		Cfwd Sel7 Dest:	
		Cfwd Sel8 Caller:		Cfwd Sel8 Dest:	
		Cfwd Last Caller:		Cfwd Last Dest:	
		Block Last Caller:		Accept Last Caller:	
Speed Dial Settings	 	 				
		Speed Dial 2:		Speed Dial 3:	
		Speed Dial 4:		Speed Dial 5:	
		Speed Dial 6:		Speed Dial 7:	
		Speed Dial 8:		Speed Dial 9:	
Supplementary Service Settings	 	 				
		CW Setting:		Block CID Setting:	
		Block ANC Setting:		DND Setting:	
		CID Setting:		CWCID Setting:	
		Dist Ring Setting:		Secure Call Setting:	
		Message Waiting:		Accept Media Loopback Request:	
		Media Loopback Mode:		Media Loopback Type:	
Distinctive Ring Settings	 	 				
		Ring1 Caller:		Ring2 Caller:	
		Ring3 Caller:		Ring4 Caller:	
		Ring5 Caller:		Ring6 Caller:	
		Ring7 Caller:		Ring8 Caller:	
Ring Settings	 	 				
		Default Ring:		Default CWT:	
		Hold Reminder Ring:		Call Back Ring:	

		 

Call Forward Settings	 	 				
		Cfwd All Dest:		Cfwd Busy Dest:	
		Cfwd No Ans Dest:		Cfwd No Ans Delay:	
Selective Call Forward Settings	 	 				
		Cfwd Sel1 Caller:		Cfwd Sel1 Dest:	
		Cfwd Sel2 Caller:		Cfwd Sel2 Dest:	
		Cfwd Sel3 Caller:		Cfwd Sel3 Dest:	
		Cfwd Sel4 Caller:		Cfwd Sel4 Dest:	
		Cfwd Sel5 Caller:		Cfwd Sel5 Dest:	
		Cfwd Sel6 Caller:		Cfwd Sel6 Dest:	
		Cfwd Sel7 Caller:		Cfwd Sel7 Dest:	
		Cfwd Sel8 Caller:		Cfwd Sel8 Dest:	
		Cfwd Last Caller:		Cfwd Last Dest:	
		Block Last Caller:		Accept Last Caller:	
Speed Dial Settings	 	 				
		Speed Dial 2:		Speed Dial 3:	
		Speed Dial 4:		Speed Dial 5:	
		Speed Dial 6:		Speed Dial 7:	
		Speed Dial 8:		Speed Dial 9:	
Supplementary Service Settings	 	 				
		CW Setting:		Block CID Setting:	
		Block ANC Setting:		DND Setting:	
		CID Setting:		CWCID Setting:	
		Dist Ring Setting:		Secure Call Setting:	
		Message Waiting:		Accept Media Loopback Request:	
		Media Loopback Mode:		Media Loopback Type:	
Distinctive Ring Settings	 	 				
		Ring1 Caller:		Ring2 Caller:	
		Ring3 Caller:		Ring4 Caller:	
		Ring5 Caller:		Ring6 Caller:	
		Ring7 Caller:		Ring8 Caller:	
Ring Settings	 	 				
		Default Ring:		Default CWT:	
		Hold Reminder Ring:		Call Back Ring: