Debug Dialer events ....

P553#
P553#
P553#
P553#!  ****** Now pulling ADSL lead from ATM0
P553#
P553#
P553#

%LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down
%DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1
%LINK-3-UPDOWN: Interface ATM0, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to down
As1 DDR: rotor dialout [best] least recent failure is also most recent failure
As1 DDR: rotor dialout [best] trying untried dialout
As1 DDR: rotor dialout [best] also has most recent failure
As1 DDR: rotor dialout [best]
Di2 DDR: Nailing up the Dialer profile [attempt 1]
Di2 DDR: Dialer dialing - persistent dialer profile
As1 DDR: Dialing cause Persistent Dialer Profile
As1 DDR: Attempting to dial XXXXXXXX
CHAT1: Attempting async line dialer script
CHAT1: Dialing using Modem script: DIALOUT & System script: none
CHAT1: process started
CHAT1: Asserting DTR
CHAT1: Chat script DIALOUT started
P553#
%LINK-3-UPDOWN: Interface Dialer2, changed state to up
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
Vi2 DDR: re-enable timeout
Di1 DDR: Cannot place call, no dialer string set
Di1 DDR: Cannot place call, no dialer string set
P553#
CHAT1: Chat script DIALOUT finished, status = Success
P553#
%LINK-3-UPDOWN: Interface Async1, changed state to up
As1 DDR: Dialer statechange to up
%DIALER-6-BIND: Interface As1 bound to profile Di2
P553#
As1 DDR: Dialer call has been placed
P553#
As1 DDR: dialer protocol up
Di2 DDR: Persistent Dialer Profile nailed up successfully
P553#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to up
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
P553#
P553#
P553#
P553#! ****** Can Ping outside world OK
P553#
P553#! ****** Now reconnecting ADSL LINE back into ATM0
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
%LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
Vi2 DDR: Dialer statechange to up
P553#
%DIALER-6-BIND: Interface Vi2 bound to profile Di1
%LINK-3-UPDOWN: Interface ATM0, changed state to up
As1 DDR: disconnecting call
Di2 DDR: dialer shutdown complete
Line protocol on Interface ATM0, changed state to up
%LINK-5-CHANGED: Interface Async1, changed state to reset
As1 DDR: has total 0 call(s), dial_out 0, dial_in 0
%DIALER-6-UNBIND: Interface As1 unbound from profile Di2
%LINK-5-CHANGED: Interface Dialer2, changed state to standby mode
%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up
%LINK-3-UPDOWN: Interface Async1, changed state to down
P553#
As1 DDR: re-enable timeout
Vi2 DDR: dialer protocol up
P553#
P553#
P553#
P553#!   ****** Can ping world OK via DSL
P553#
P553#
P553#!   ****** Now repeat test
P553#!   ****** will pull ADSL for 2nd time
P553#
Interface Virtual-Access2, changed state to down
%DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1
%LINK-3-UPDOWN: Interface ATM0, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to down
Di2 DDR: Dialer profile is already nailed-up
P553#
%LINK-3-UPDOWN: Interface Dialer2, changed state to up
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
Di1 DDR: Cannot place call, no dialer string set
P553#
Vi2 DDR: re-enable timeout
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
Di1 DDR: Cannot place call, no dialer string set
P553#
P553#
P553#!   ****** Cannot ping world - backup doesnt come up
P553#
P553#