System Bootstrap, Version 12.3(8r)YI3, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.


C870 series (Board ID: 3-148) platform with 262144 Kbytes of main memory


Booting flash:/c870-advsecurityk9-mz.124-4.T7.bin

Self decompressing the image : ########################################################################## [OK]
              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 29-Nov-06 00:43 by kellythw
Image text-base: 0x8002008C, data-base: 0x813F8A90


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 871W (MPC8272) processor (revision 0x200) with 236544K/25600K bytes of memory.
Processor board ID FHK105110ZY
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
5 FastEthernet interfaces
1 802.11 Radio
128K bytes of non-volatile configuration memory.
24576K bytes of processor board System flash (Intel Strataflash)



         --- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no


Press RETURN to get started!


*Mar  1 00:00:06.587: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Initialized 
*Mar  1 00:00:06.591: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Enabled sslinit fn

*Mar  1 00:00:08.775: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar  1 00:00:08.775: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet4, changed state to down
*Mar  1 00:00:09.779: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar  1 00:00:11.303: USB init complete.
*Mar  1 00:00:31.419: %USB_HOST_STACK-5-USB_ENUM_FAIL_GETDESCR: Failed to enumerate a USB device as not able to read the device's description.
*Mar 31 09:08:06.091: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Mar 31 09:08:06.375: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.4(4)T7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Wed 29-Nov-06 00:43 by kellythw
*Mar 31 09:08:06.379: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
*Mar 31 09:08:06.463: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 31 09:08:06.463: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Mar 31 09:08:07.267: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 31 09:08:07.955: %LINK-5-CHANGED: Interface FastEthernet4, changed state to administratively down
*Mar 31 09:08:07.979: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to up
*Mar 31 09:08:07.983: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to up
*Mar 31 09:08:07.987: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to up
*Mar 31 09:08:07.991: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 31 09:08:08.123: %LINK-5-CHANGED: Interface Virtual-Dot11Radio0, changed state to administratively down
*Mar 31 09:08:08.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet3, changed state to down
*Mar 31 09:08:08.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet2, changed state to down
*Mar 31 09:08:08.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1, changed state to down
*Mar 31 09:08:08.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Mar 31 09:08:09.123: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Dot11Radio0, changed state to down
Router>
Router>
Router>en
Router#show run
Building configuration...

Current configuration : 810 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
ip subnet-zero
ip cef
!
!
!
!
!
!
! 
!
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Dot11Radio0
 no ip address
 shutdown
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
 station-role root
!
interface Vlan1
 no ip address
!
ip classless
!
no ip http server
no ip http secure-server
!
!
control-plane
!
!
line con 0
 no modem enable
line aux 0
line vty 0 4
!
 scheduler max-task-time 5000
end

Router#