rokscom-brfw01#sh run
Building configuration...

Current configuration : 1900 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname rokscom-brfw01
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$prZh$8ZDhp7/kOMr.Anaw8xXJ3.
!
no aaa new-model
ip subnet-zero
ip cef
!
!
no ip domain lookup
ip name-server 213.247.43.41
ip name-server 213.247.34.8
!
ip inspect name FW-In tcp audit-trail off
ip inspect name FW-In udp
ip inspect name FW-In icmp
ip audit po max-events 100
!
!
no crypto isakmp enable
!
bridge irb
!
!
!
interface FastEthernet0/0
 description DMZ
 no ip address
 ip access-group 101 in
 no ip proxy-arp
 duplex auto
 speed auto
 bridge-group 10
!
interface FastEthernet0/1
 description Internet
 no ip address
 no ip proxy-arp
 ip inspect FW-In in
 duplex auto
 speed auto
 bridge-group 10
!
interface BVI10
 ip address 217.166.55.110 255.255.255.224
!
no ip http server
no ip http secure-server
ip classless
ip route 0.0.0.0 0.0.0.0 217.166.55.97
!
!
ip access-list log-update threshold 1
access-list 1 permit 82.95.96.98
access-list 1 remark -- VCD Marcel van Strien
access-list 1 permit 80.101.192.190
access-list 1 remark -- KSMC LAN
access-list 1 permit 172.10.10.0 0.0.0.255
access-list 1 remark -- CoLo Amsterdam
access-list 1 permit 83.98.175.192 0.0.0.31
access-list 1 remark -- NedFox Emmeloord
access-list 1 permit 217.166.55.96 0.0.0.31
access-list 1 remark -- VCD Infra Eindhoven
access-list 1 permit 212.29.191.0 0.0.0.63
access-list 1 permit 217.166.55.80 0.0.0.15
access-list 1 permit 217.166.55.0 0.0.0.255
access-list 101 deny   ip any any
access-list 111 permit ip any any
!
bridge 10 protocol ieee
bridge 10 route ip
!
!
!
!
!
line con 0
 password 7 082F494A0F161D
 login local
line aux 0
line vty 0 4
 access-class 1 in
 privilege level 15
 password cisco
 login
 transport input telnet ssh
!
scheduler allocate 20000 1000
!
end

rokscom-brfw01#


rokscom-brfw01#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(26), RELEASE SOFTWARE (f
c2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 17-Mar-08 15:23 by dchih

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

rokscom-brfw01 uptime is 5 hours, 2 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s3-mz.123-26.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco 2621 (MPC860) processor (revision 0x101) with 61440K/4096K bytes of memory
.
Processor board ID JAD045005BL (3541116416)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2142 (will be 0x2102 at next reload)

rokscom-brfw01#