############################################################################################################### File "flash:/c1240-k9w8-mx.124-10b.JA/c1240-k9w8-mx.124-10b.JA" uncompressed and installed, entry point: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(10b)JA, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Wed 24-Oct-07 15:45 by prod_rel_team Image text-base: 0x00003000, data-base: 0x005FFA40 Initializing flashfs... flashfs[1]: 8 files, 3 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 15998976 flashfs[1]: Bytes used: 5404160 flashfs[1]: Bytes available: 10594816 flashfs[1]: flashfs fsck took 3 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. Radio 1 A506 7100 E8000000 A0000000 80000000 3 Radio 1 A506 6700 E8000100 A0040000 80010000 2 cisco AIR-LAP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. Processor board ID FCZ11458078 PowerPCElvis CPU at 262Mhz, revision number 0x0950 Last reset from power-on LWAPP image version 4.2.61.0 1 FastEthernet interface 2 802.11 Radio(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:1D:A1:CE:39:DC Part Number : 73-10256-06 PCA Assembly Number : 800-26918-05 PCA Revision Number : A0 PCB Serial Number : FOC11415NU9 Top Assembly Part Number : 800-29152-02 Top Assembly Serial Number : FCZ11458078 Top Revision Number : A0 Product/Model Number : AIR-LAP1242AG-E-K9 o ^ % Invalid input detected at '^' marker.  Press RETURN to get started! *Mar 1 00:00:05.283: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed *Mar 1 00:00:06.883: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 *Mar 1 00:00:08.457: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 *Mar 1 00:00:09.627: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source *Mar 1 00:00:09.640: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(10b)JA, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Wed 24-Oct-07 15:45 by prod_rel_team *Mar 1 00:00:09.641: %SNMP-5-COLDSTART: SNMP agent on host AP001d.a1ce.39dc is undergoing a cold start *Mar 1 00:00:09.661: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset *Mar 1 00:00:09.693: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset *Mar 1 00:00:09.721: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds *Mar 1 00:00:10.497: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up *Mar 1 00:00:10.661: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down *Mar 1 00:00:10.693: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down *Mar 1 00:00:11.497: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up *Mar 1 00:00:28.666: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERYinvalid level 0, slot 0, chan 11 *Mar 1 00:00:28.694: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upinvalid level 0, slot 1, chan 52 *Mar 1 00:00:28.900: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up *Mar 1 00:00:29.154: Logging LWAPP message to 255.255.255.255. %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.5.0.248, mask 255.255.255.0, hostname AP001d.a1ce.39dc %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP. %LWAPP-3-CLIENTEVENTLOG: Did not get any DNS options from DHCP. %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER %LWAPP-3-CLIENTERRORLOG: Discovery Timer: found the discovery response from master controller %LWAPP-5-CHANGED: LWAPP changed state to JOIN %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down %LWAPP-5-CHANGED: LWAPP changed state to CFG %LWAPP-3-CLIENTERRORLOG: Config Request Timer: did not recieve config response (controller - WLC-1) %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE. %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available. flashfs[0]: 8 files, 3 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 15998976 flashfs[0]: Bytes used: 5404160 flashfs[0]: Bytes available: 10594816 flashfs[0]: flashfs fsck took 26 seconds. Base ethernet MAC Address: 00:1d:a1:ce:39:dc Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Loading "flash:/c1240-k9w8-mx.124-10b.JA/c1240-k9w8-mx.124-10b.JA"...################################################################################################################################################################################################################################################################################################################################ File "flash:/c1240-k9w8-mx.124-10b.JA/c1240-k9w8-mx.124-10b.JA" uncompressed and installed, entry point: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(10b)JA, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Wed 24-Oct-07 15:45 by prod_rel_team Image text-base: 0x00003000, data-base: 0x005FFA40 Initializing flashfs... flashfs[1]: 8 files, 3 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 15998976 flashfs[1]: Bytes used: 5404160 flashfs[1]: Bytes available: 10594816 flashfs[1]: flashfs fsck took 3 seconds. flashfs[1]: Initialization complete....done Initializing flashfs. Radio 1 A506 7100 E8000000 A0000000 80000000 3 Radio 1 A506 6700 E8000100 A0040000 80010000 2 cisco AIR-LAP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory. Processor board ID FCZ11458078 PowerPCElvis CPU at 262Mhz, revision number 0x0950 Last reset from reload LWAPP image version 4.2.61.0 1 FastEthernet interface 2 802.11 Radio(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:1D:A1:CE:39:DC Part Number : 73-10256-06 PCA Assembly Number : 800-26918-05 PCA Revision Number : A0 PCB Serial Number : FOC11415NU9 Top Assembly Part Number : 800-29152-02 Top Assembly Serial Number : FCZ11458078 Top Revision Number : A0 Product/Model Number : AIR-LAP1242AG-E-K9 o ^ % Invalid input detected at '^' marker.  Press RETURN to get started! *Mar 1 00:00:05.290: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed *Mar 1 00:00:06.697: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 *Mar 1 00:00:08.078: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 *Mar 1 00:00:09.247: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source *Mar 1 00:00:09.260: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(10b)JA, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Wed 24-Oct-07 15:45 by prod_rel_team *Mar 1 00:00:09.260: %SNMP-5-COLDSTART: SNMP agent on host AP001d.a1ce.39dc is undergoing a cold start *Mar 1 00:00:09.281: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset *Mar 1 00:00:09.312: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset *Mar 1 00:00:09.340: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds *Mar 1 00:00:10.119: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up *Mar 1 00:00:10.281: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down *Mar 1 00:00:10.312: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down *Mar 1 00:00:11.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up *Mar 1 00:00:28.286: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERYinvalid level 0, slot 0, chan 11 *Mar 1 00:00:28.314: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to upinvalid level 0, slot 1, chan 52 *Mar 1 00:00:28.517: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up *Mar 1 00:00:28.774: Logging LWAPP message to 255.255.255.255. %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255) %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.5.0.249, mask 255.255.255.0, hostname AP001d.a1ce.39dc %LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP. %LWAPP-3-CLIENTEVENTLOG: Did not get any DNS options from DHCP. %LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER %LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER %LWAPP-3-CLIENTERRORLOG: Discovery Timer: found the discovery response from master controller %LWAPP-5-CHANGED: LWAPP changed state to JOIN %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down %LWAPP-5-CHANGED: LWAPP changed state to CFG %LWAPP-3-CLIENTERRORLOG: Config Request Timer: did not recieve config response (controller - WLC-1) %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE. %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available. flashfs[0]: 8 files, 3 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 15998976 flashfs[0]: Bytes used: 5404160 flashfs[0]: Bytes available: 10594816 flashfs[0]: flashfs fsck took 26 seconds. Base ethernet MAC Address: 00:1d:a1:ce:39:dc Initializing ethernet port 0... Reset ethernet port 0... Reset done! ethernet link up, 100 mbps, full-duplex Ethernet port 0 initialized: link is up Loading "flash:/c1240-k9w8-mx.124-10b.JA/c1240-k9w8-mx.124-10b.JA"...####################################################################################################################################################################