=============
CE1 ( Source )
==============

interface Loopback11000
 ip vrf forwarding Multi_0
 ip address 212.31.219.227 255.255.255.255
 ip pim sparse-mode
 ip igmp static-group 225.0.0.0
end

CE1#sh run int s0/0/0:0.300
Building configuration...

Current configuration : 178 bytes
!
interface Serial0/0/0:0.300 point-to-point
 ip vrf forwarding Multi_0
 ip unnumbered Loopback11000
 ip pim sparse-mode
 ip mroute-cache
 frame-relay interface-dlci 300
end

ip pim vrf Multi_0 rp-address 212.31.219.227 55
no ip pim vrf Multi_0 dm-fallback
ip pim vrf Multi_0 autorp listener

CE1#sh access-lists 55
Standard IP access list 55
    10 permit 225.0.0.0, wildcard bits 0.0.0.3 (4411 matches)

fx-18xx150-ce1-am-atl#sh ip pim vrf Multi_0 rp
Group: 225.0.0.0, RP: 212.31.219.227, next RP-reachable in 00:00:44
Group: 225.0.0.1, RP: 212.31.219.227, next RP-reachable in 00:00:17
fx-18xx150-ce1-am-atl#


====================
CE2 ( Destination )
====================

!
interface Loopback11000
 ip vrf forwarding Multi_0
 ip address 212.31.217.117 255.255.255.255
 ip pim sparse-mode
end

CE2
CE2sh run int Gi0/1.300
Building configuration...

Current configuration : 167 bytes
!
interface GigabitEthernet0/1.300
 encapsulation dot1Q 600
 ip vrf forwarding Multi_0
 ip address 200.200.200.1 255.255.255.0
 ip pim sparse-mode
 no cdp enable
end

CE2sh run int PO1/1.300
Building configuration...

Current configuration : 169 bytes
!
interface POS1/1.300 point-to-point
 ip vrf forwarding Multi_0
 ip unnumbered Loopback11000
 ip pim sparse-mode
 no cdp enable
 frame-relay interface-dlci 300
end

ip pim vrf Multi_0 rp-address 212.31.217.117 55

ip pim vrf Multi_0 autorp listener

CE2#sh ip pim vrf Multi_0 rp
Group: 225.0.0.0, RP: 212.31.217.117, next RP-reachable in 00:00:09
72xx167vxr#