デスクトップシリーズスイッチ製品で、MACアドレスによるH/W転送の確認を行うためには、以下の様なコマンドが使用できます。
show mac address-table dynamic
show platform forward <ingress_interface> <source_mac> <dest_mac>
また、L2 Tracerouteコマンドも使用可能です。
以下はL2 Tracerouteの出力例です。
3750#traceroute mac ip 2.2.2.3 2.2.2.4 detail
Translating IP to mac .....
2.2.2.3 => 000d.283d.73c1
2.2.2.4 => 0012.442b.3fff
Source 000d.283d.73c1 found on 3750[WS-C3750G-16TD] (2.2.2.1)
1 3750 / WS-C3750G-16TD / 2.2.2.1 :
Gi2/0/3 [auto, auto] => Gi1/0/4 [auto, auto]
2 3550 / WS-C3550-24-PWR / 2.2.2.2 :
Fa0/3 [auto, auto] => Fa0/23 [auto, auto]
Destination 0012.442b.3fff found on 3550[WS-C3550-24-PWR] (2.2.2.2)
Layer 2 trace completed.
3750#traceroute mac 000d.283d.73c1 0012.442b.3fff detail
Source 000d.283d.73c1 found on 3750[WS-C3750G-16TD] (2.2.2.1)
1 3750 / WS-C3750G-16TD / 2.2.2.1 :
Gi2/0/3 [auto, auto] => Gi1/0/4 [auto, auto]
2 3550 / WS-C3550-24-PWR / 2.2.2.2 :
Fa0/3 [auto, auto] => Fa0/23 [auto, auto]
Destination 0012.442b.3fff found on 3550[WS-C3550-24-PWR] (2.2.2.2)
Layer 2 trace completed.