Cisco Support Community
отмена
Отображаются результаты для 
Вместо этого искать 
Вы имели в виду: 
Объявления
Добро пожаловать в Сообщество Технической поддержки Cisco. Мы рады получить обратную связь .
New Member

Customizing VCS Starter Pack against SIP scanners

Hello Everyone!

I need consultation about configuration VCS Starter Pack that will help against SIP scanners..

Looks what we have:  VCS with public IP, 4 SX20 also with Publick IP in different cities(If it needed we could hide them behind NAT) and some codecs that already registered on VCS but new configuration should not touch it( is it possible makes apply different configuration between different endpoints?)

These 4 codecs constantly are under attacks of SIP scanners. So we should registrate them to VCS ( could we do it properly if we hide them behind NAT?).

Please help me with configuration of VCS Starter Pack that reduce this threat.

Thanks for advance

Теги (3)
1 ОТВЕТ
Cisco Employee

Customizing VCS Starter Pack against SIP scanners

ответ дан в параллельной ветке

https://supportforums.cisco.com/thread/2248341?tstart=0

117
Просмотры
0
Полезный материал
1
Ответы
СоздатьДля создания публикации, пожалуйста в систему