Cisco Support Community
отмена
Отображаются результаты для 
Вместо этого искать 
Вы имели в виду: 
Объявления
Добро пожаловать в Сообщество Технической поддержки Cisco. Мы рады получить обратную связь .
Community Member

Проблемы со свичём sf300-48pp

Добрый день

Купили свичь sp300-48p. После первой авторизации по дефолтным настройкам предложил сменить пароль. Поменял, при попытки авторизоваться повторно, выдавал ошибку, что логин пароль неверен. Сбросил свичь до заводских настроек, после этого свичь перестал пинговаться. При попытки зайти через консоль постоянно выдаёт ошибку

10-Oct-2013 17:59:24 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_write_mem failed. addr 0x1332 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1 retries_num 12
10-Oct-2013 17:59:25 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_write_mem failed. addr 0x1332 dev_num 1 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1 retries_num 12
10-Oct-2013 17:59:25 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_write_mem failed. addr 0x1332 dev_num 2 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1 retries_num 12
10-Oct-2013 17:59:26 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_write_mem failed. addr 0x1332 dev_num 3 val 0x0) was detected: POE is Disabled untill Reset
10-Oct-2013 17:59:32 %INIT-I-InitCompleted: Initialization task is completed


i2c_status fail: 1
10-Oct-2013 17:59:34 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x318 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
10-Oct-2013 17:59:35 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12ea dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1 retries_num 12
10-Oct-2013 17:59:36 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_write_mem failed. addr 0x139c dev_num 0 val 0x1) was detected: POE is Disabled untill Reset
i2c_status fail: 1
10-Oct-2013 17:59:37 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x139c dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
10-Oct-2013 17:59:38 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12e6 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
10-Oct-2013 17:59:39 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12e8 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
10-Oct-2013 17:59:43 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x318 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
i2c_status fail: 1
10-Oct-2013 17:59:44 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12ea dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
10-Oct-2013 17:59:44 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration change trap.
10-Oct-2013 17:59:44 %SNMP-I-CDBITEMSNUM: Number of running configuration items loaded: 0

10-Oct-2013 17:59:44 %SNMP-I-CDBITEMSNUM: Number of startup configuration items loaded: 0
The SSH Server is generating a default RSA key.
This may take a few minutes, depending on the key size.
i2c_status fail: 1 retries_num 12
10-Oct-2013 17:59:45 %HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_write_mem failed. addr 0x139c dev_num 0 val 0x1) was detected: POE is Disabled untill Reset
10-Oct-2013 17:59:45 %Environment-I-FAN-STAT-CHNG: FAN# 1 status changed - operational.
10-Oct-2013 17:59:45 %Environment-I-FAN-STAT-CHNG: FAN# 2 status changed - operational.
10-Oct-2013 17:59:45 %Environment-I-FAN-STAT-CHNG: FAN# 3 status changed - operational.
10-Oct-2013 17:59:45 %Environment-A-FAN-STAT-CHNG: FAN# 4 status changed - not operational.
i2c_status fail: 1

i2c_status fail: 1 retries_num 12
i2c_status fail: 1
i2c_status fail: 1
i2c_status fail: 1
i2c_status fail: 1 retries_num 12
i2c_status fail: 1
i2c_status fail: 1 retries_num 12
i2c_status fail: 1
i2c_status fail: 1
i2c_status fail: 1 retries_num 12
i2c_status fail: 1
i2c_status fail: 1
i2c_status fail: 1 retries_num 12
i2c_status fail: 1
i2c_status fail: 1
i2c_status fail: 1 retries_num 12
i2c_status fail: 1
i2c_status fail: 1
i2c_status fail: 1 retries_num 12
i2c_status fail: 1
i2c_status fail: 1
i2c_status fail: 1 retries_num 12
i2c_status fail: 1

Из за этого даже не получается авторизоваться. Помогите разобраться в этой проблеме.

1 ОТВЕТ
Community Member

Точная модель свича Cisco

Точная модель свича Cisco SF300-48PP-K9-EU

131
Просмотры
0
Полезный материал
1
Ответы
СоздатьДля создания публикации, пожалуйста в систему