отмена
Отображаются результаты для 
Вместо этого искать 
Вы имели в виду: 
Объявления
Добро пожаловать в Сообщество Технической поддержки Cisco. Мы рады получить обратную связь .
New Member

%IFS-3-FS_CREATE_FAIL: Failed to create NVGEN file system, Bad file number switch 6513

Hello!

After setting up the parser view

I can not see the startup configuration .

In the log I see a message

% IFS- 3 -FS_CREATE_FAIL: Failed to create NVGEN file system, Bad file number

-Traceback = 406229A0 405CCA68 405CCBE4 405A41D4 420937E4 405D1D9C 4191E1F4 419109E4 4166AE40 4166AE2TS

vld-cat6513- 2 # sh run

Building configuration ...

Building configuration ...

vld-cat6513- 2 #

I enter in the configuration

parser view maxpatrol

commands exec include show cdp interface

commands exec include dir / recursive all-filesystems

commands exec include show access-list

commands exec include show arp

commands exec include show auto secure config

commands exec include show crypto ipsec transform-set

commands exec include show cef interface

commands exec include show crypto isakmp policy

commands exec include show crypto map

commands exec include show interfaces

commands exec include show interfaces description

commands exec include show interfaces Null0

commands exec include show inventory

commands exec include show inventory raw

commands exec include show ip eigrp

commands exec include show ip eigrp interfaces

commands exec include show ip interface

commands exec include show ip ospf database database-summary

commands exec include show ip ospf interface

commands exec include show ip prefix-list

commands exec include show ip protocols

commands exec include show ip route

commands exec include show ip ssh

commands exec include show ipv6 interface

commands exec include show ipv6 traffic

commands exec include show logging

commands exec include show login

commands exec include show ntp associations

commands exec include show policy-map control-plane

commands exec include show privilege

commands exec include show route-map

commands exec include show running-config

commands exec include show snmp user

commands exec include show startup-config

commands exec include show version

commands exec include verify / md5

In my configuration i use - service compress-config

I get warning:

dir all-filesystems

% Configuration buffer full, can't add command: commands exec include show interfaces Vlan92 description

% Aborting Save.

Directory of system :/

    2 -r - 0 <no date> default-running-config

    3 dr-x 0 <no date> memory

    1 -rw- 115927 Nov May 2013 09:43:16 +11:00 running-config

   13 dr-x 0 <no date> vfiles

my version:

sh ver

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXI6, RELEASE SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Compiled Mon 28-Mar-11 12:09 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)

vld-cat6513-2 uptime is 1 year, 49 weeks, 3 days, 16 hours, 55 minutes

Uptime for this control processor is 1 year, 49 weeks, 3 days, 15 hours, 58 minutes

Time since vld-cat6513-2 switched to active is 1 year, 49 weeks, 3 days, 16 hours, 0 minutes

System returned to ROM by  power cycle at 06:20:21 VLD Mon Jul 4 2011 (SP by power on)

System restarted at 01:48:34 VLAT Sun Mar 18 2012

System image file is "sup-bootdisk:s72033-adventerprisek9_wan-mz.122-33.SXI6.bin"

Last reload reason: Unknown reason

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco WS-C6513 (R7000) processor (revision 2.0) with 983008K/65536K bytes of memory.

Processor board ID SAL1245977K

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

34 Virtual Ethernet interfaces

168 Gigabit Ethernet interfaces

8 Ten Gigabit Ethernet interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

Теги (1)
5 ОТВЕТ.

%IFS-3-FS_CREATE_FAIL: Failed to create NVGEN file system, Bad f

Давайте все-таки в русском разделе форума говорить по-русски (если тому нет объективных препятствий).

Проблема с "show startup" возникает только из-под этого view, а рутовый view и обычный enable в порядке?

Покажите dir nvram.

New Member

%IFS-3-FS_CREATE_FAIL: Failed to create NVGEN file system, Bad f

Проблема возникает с show running и из под root view и из под обычного enable.

dir nvram:

Directory of nvram:/

1918  -rw-       56275                      startup-config

1919  ----        3663                      private-config

1920  -rw-       56275                      underlying-config

    1  ----         494                      persistent-data

    2  ----           0                      rf_cold_starts

    3  -rw-           0                      ifIndex-table

    4  -rw-          13                      snmpid-file

1964024 bytes total (1899938 bytes free)

%IFS-3-FS_CREATE_FAIL: Failed to create NVGEN file system, Bad f

Похоже на проблемы с NVRAM. Если есть сервисный контракт - лучше заведите кейс.

Если нет... Суп после следующей перезагрузки может не включиться. А может, какой-то хитрый глюк будет вылечен перезагрузкой. Скорее - первое. Если резервный суп есть, то лучше сфейловерить, если нет - надо думать над перезагрузкой шасси во время длительного окна обслуживания, исходя из того, что может потребоваться вынуть умерший суп и установить замену.

New Member

%IFS-3-FS_CREATE_FAIL: Failed to create NVGEN file system, Bad f

Я проверил на второй коробке с аналогичной конфигурацией - железо и IOS. Ситуация анлогичная. Видимо бага IOS. Описание данной баги пока не нашел. Буду создавать кейс.

Cisco Employee

%IFS-3-FS_CREATE_FAIL: Failed to create NVGEN file system, Bad f

Возможно новый баг. Подобная проблема встречалась неоднократно, но с триггером "parser view" - по-моему только один раз, на 7200, в версии 12.4(15)T3 и traceback не выдавался. Баг открыт не был.

Кр. того есть ряд внутренних багов.

Если в конфигурации есть "parser config cache interface", то возможно это CSCtz17804, исправленный в 12.2(33)SXJ3.

Баг CSCuc08311 в состоянии 'U' и тоже для ветки SXI - SXI7.

196
Просмотры
4
Полезный материал
5
Ответы