Prime Infrastructure 2.2.3 で High Availability 構成時、ncs status と ncs ha status の出力結果(フェイルオーバ完了時)は以下のようになります。主要なサービスおよびステータスに赤色をつけました。
プライマリ:
kkuwabar-211-pi22/admin# ncs status
Health Monitor Server is running.
Matlab Server Instance 1 is Stopped
Ftp Server is Stopped
Database server is stopped
Matlab Server Instance 3 is Stopped
Matlab Server is running
Tftp Server is running
NMS Server is stopped.
Matlab Server Instance 2 is running
CNS Gateway with port 11011 is down
CNS Gateway SSL with port 11012 is down
CNS Gateway with port 11013 is down
CNS Gateway SSL with port 11014 is down
Plug and Play Gateway Broker with port 61617 is down
Plug and Play Gateway config, image and resource are down on https
Plug and Play Gateway is stopped.
SAM Daemon is running ...
DA Daemon is running ...
kkuwabar-211-pi22/admin# ncs ha status
[Role] Primary [Secondary Server] 10.71.224.212(10.71.224.212) [State] Primary Failover [Failover Type] automatic
もしくは
kkuwabar-211-pi22/admin# ncs ha status
[Role] Primary [Secondary Server] 10.71.224.212(10.71.224.212) [State] Primary Alone [Failover Type] automatic
セカンダリ:
kkuwabar-212-pi22/admin# ncs status
Health Monitor Server is running.
Matlab Server Instance 1 is running
Ftp Server is running
Database server is running
Matlab Server Instance 3 is running
Matlab Server is running
Tftp Server is running
NMS Server is running.
Matlab Server Instance 2 is running
Plug and Play Gateway is running.
SAM Daemon is running ...
DA Daemon is running ...
kkuwabar-212-pi22/admin# ncs ha status
[Role] Secondary [Primary Server] kkuwabar-211-pi22(10.71.224.211) [State] Secondary Active [Failover Type] automatic