キャンセル
次の結果を表示 
次の代わりに検索 
もしかして: 
cancel
1068
閲覧回数
0
いいね!
0
コメント
ysugimot
Level 1
Level 1

【Overview】

Catalyst Compact シリーズの詳細は下記ページに記載されています。

http://www.cisco.com/web/JP/product/hs/switches/cat2960c/prodlit/data_sheet_c78-639705.html

【型番】

ライセンスの型番は以下のものがあります。

WS-C2960CPD-8PT-L

WS-C2960CPD-8TT-L

WS-C2960CG-8TC-L

WS-C2960C-8TC-S

WS-C2960C-8TC-L

WS-C2960C-8PC-L

WS-C2960C-12PC-L

C3560CG-8PC-S-SW

C3560CG-8TC-S-SW

WS-C3560CG-8PC-S

WS-C3560CG-8TC-S

WS-C3560C-8PC-S

WS-C3560C-12PC-S

WS-C3560CPD-8PT-S

--------------------------------------------------------------------------------------------

【製品新規購入時】

- ライセンス状態

発注したライセンス製品すべてについて機器にプリインストールされます。

- ライセンス取得手順

プリインストールの為、手続きは不要です。

--------------------------------------------------------------------------------------------

【RMA時】

- ライセンス状態

RMAされた機器は、元のPIDに準じたライセンスが含まれた状態で配送されますが、

ライセンスが不足している場合や、交換前の機器を入手後に別途ライセンスを購入して適用している場合には、

代替機器にも別途適用する必要があります。

- ライセンス取得手順

ライセンスの付け替えについてはJapan TACまで申請してください。

必要情報:

故障機と代替機の下記情報

Product ID: *1

Serial#:*1

Show Version

*1確認コマンド"show license udi"

- ライセンス投入手順

LICENSE KEY INSTALLATION INSTRUCTIONS

Attached to this email you will find a file with the ".lic" extension.  This is the file that will activate the Feature Set that you purchased for your router.  Do not edit the contents of the .lic file in any way or you will render the file useless.

Installing your Cisco Software Activation License

This license can be installed using the command line interface (CLI) or the Cisco License Manager.  Instructions for using the CLI are included below.  For details on downloading or using the Cisco License Manager, please go to http://www.cisco.com/go/clm.

Please note the Unique Device Identifier (UDI) for this license. This license can only be installed on the router that has this matching UDI.

License Installation Using the CLI

License file on CUE module can be installed from FTP or TFTP server using the following syntax

CUE-SM#license install Error! Hyperlink reference not valid.

Optionally if FTP server is setup for Anonymous user, then following command can be used:

CUE-SM#license install Error! Hyperlink reference not valid.

Example:

CUE-SM# license install ftp://testman:guest@10.86.26.195/LIC-FILES/CUE/Ports.lic

Installing...Feature:VMIVR-PORT...OK:No Error License Note:

Application will evaluate this change upon next reload

1/1 licenses were successfully installed

0/1 licenses were existing licenses

0/1 licenses were failed to install

At this point of time, the license is installed in the system. But, it can be used only upon reload.

You may install more than one license file on the device before the reload.

Application status check using the CLI

CUE-SE# show license status application

More information about CUE licensing may be found in the "Software Activation of Cisco Unity Express 7.1" document on www.cisco.com

Getting Started

検索バーにキーワード、フレーズ、または質問を入力し、お探しのものを見つけましょう

シスコ コミュニティをいち早く使いこなしていただけるよう役立つリンクをまとめました。みなさんのジャーニーがより良いものとなるようお手伝いします