キャンセル
次の結果を表示 
次の代わりに検索 
もしかして: 
cancel
817
閲覧回数
0
いいね!
1
返信

Cisco3640ルータのログについて

Tetsuya Hidaka
Level 1
Level 1

お世話になります。

現在、Cisco3640ルータを使用していますが、その起動において以下の

ログエラーが表示され正常に起動しなくなりました。

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled

PCMCIA Slot1: No Card Present

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled

loadprog: bad file magic number:      0x0
boot: cannot load "flash:"

System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.C3600 processor with 32768 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled

rommon 1 >

メッセージ上からは起動途中のセルフチェックの段階においてエラーが発生し、IOSを読み込めなくなって

いると思われます。また、そのため、ROMモニタで起動していると思われます。

このログから、ハードウェア的な故障と考えられますでしょうか?またその場合、故障の要因については

電源、メモリ等どのような箇所の故障が考えられますでしょうか?

以上、お忙しいところお手数ですが早めに回答頂けると助かりますので情報をお持ちであれば

些細なことでもかまいませんのでよろしくお願い致します。

1件の返信1

imadai789
Level 1
Level 1

こんにちは、

boot: cannot load "flash:"

とログが出ていて flash を認識できていないようなので、flash やその周辺の bus などの不良が疑われます。

以下のようなことをして、再度起動試験をしてみてはどうでしょうか。

-flash の抜き差しをして起動するかどうか。

-flash のformatをして起動するかどうか。

-flash の交換をして起動するかどうか。

よろしくお願いします。