12935 Supplicant stopped responding to ISE during EAP-TLS certificate exchange
I see this error in the ISE logs from time to time, and would like to get rid of it.
But I can't seem to find any information on HOW to get rid of it.
The ISE log is somewhat vague in it's solution suggestion.
Here goes the whole thing:
Event: 5411 Supplicant stopped responding to ISE
Failure reason: 12935 Supplicant stopped responding to ISE during EAP-TLS certificate exchange
Resolution: Verify that supplicant is configured properly to conduct a full EAP conversation with ISE. Verify that NAS is configured properly to transfer EAP messages to/from supplicant. Verify that supplicant or NAS does not have a short timeout for EAP conversation. Check the network that connects the Network Access Server to ISE. Verify that ISE local server certificate is trusted on supplicant. Verify that supplicant has a properly configured user/machine certificate.
The supplicant i a Windows 7 og Windows XP computer, and it is indeed set up to use Certificate authentication.
12935 Supplicant stopped responding to ISE during EAP-TLS certif
Did you ever get a fix for this?
I am running across the same issue with Win7 Supplicants.
Every supplicant configuration example that I've seen specifies a list of the PSN's in the "connect to these servers" box but I haven't been able to find specific documentation as to whether or not that is actually required.
I'd like to know if there's an answer out there for this issue.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...