Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

6513 is not intergrating with ACS

hello ,

i have a problem with one of the devices,6513 switch. the acs server is directly connected to the switch inside fwsm.

i am able to ping the ACS server from MSFC and inside FWSM , but it not taking the ACS. i have other 6513 and many other switches and router that integrated normally with ACS.

Please i need some help.

Regards,

1 ACCEPTED SOLUTION

Accepted Solutions

Re: 6513 is not intergrating with ACS

Incase you are using tacacs and issue " ip tacacs source interface command "

User the interface which is listed in acs network configuration --->switch--->IP address

Switch should use that IP address as source for tacacs packets

Regards,

~JG

Do rate helpful posts

2 REPLIES

Re: 6513 is not intergrating with ACS

Incase you are using tacacs and issue " ip tacacs source interface command "

User the interface which is listed in acs network configuration --->switch--->IP address

Switch should use that IP address as source for tacacs packets

Regards,

~JG

Do rate helpful posts

New Member

Re: 6513 is not intergrating with ACS

Thank you JG, that was very helpful.

Regards,

George

141
Views
0
Helpful
2
Replies
CreatePlease to create content