Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

802.1x dynamic vlan assignment based on MAC?

Hello,

I am using Catalyst3750 and Widows AD Authentication.

Our customers' pc is runnnig Windows (isn't 802.1x capable) that is connected to the catalyst switch.

Is it possible to dynamic assign a Vlan based on MAC?

When possible, we want to make it without using VMPS.

and, is there any document relating to the above.

Thanks a lot for you help.

Tomoyuki

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: 802.1x dynamic vlan assignment based on MAC?

Hello Tomoyuki,

which Radius Server are you using to authenticate your Clients?

For the Secure ACS you can configure a feature called "MAC-Authentication-Bypass" which fullfils your requirements.

This Feature must be configured on the Switch and on the Radius Server (which does the vlan assigment based on the MAC-Address of the Client)

An Overwiew of this feature can be found here:

http://www.cisco.com/univercd/cc/td/doc/solution/macauthb.pdf

I hope this helps,

Kind regards,

Chris

2 REPLIES
New Member

Re: 802.1x dynamic vlan assignment based on MAC?

Hello Tomoyuki,

which Radius Server are you using to authenticate your Clients?

For the Secure ACS you can configure a feature called "MAC-Authentication-Bypass" which fullfils your requirements.

This Feature must be configured on the Switch and on the Radius Server (which does the vlan assigment based on the MAC-Address of the Client)

An Overwiew of this feature can be found here:

http://www.cisco.com/univercd/cc/td/doc/solution/macauthb.pdf

I hope this helps,

Kind regards,

Chris

Re: 802.1x dynamic vlan assignment based on MAC?

Hello Chris,

I'm using radius that secure ACS server.

Thanks a lot  for your help.

I appreciate it.

Tomoyuki

1887
Views
0
Helpful
2
Replies