Currently i am using aaa accouting for 3560 switches with ACS4.1 solution engine. I want to log the IOS commands entered. I have chosen the "cmd" and "cmd-arg" field in the CSV and syslog (tacacs+ accounting), these field are empty (..) when the csv record is seen on the ACS server and syslog server. Can some body tell how i can log the commands entered after the authentication with ACS is successful.
I tested the tacacs+ administration on ACS 4.2 (successful testing). But when i went to client site and enabled tacacs+ administration, it was not working. The commands are not shown on the csv file as well as on syslog server. The client is using ACS solution engine 4.1. JS you mentioned the ACS code 4.1.1 , u were asking for the version of acs or any error code. How i can get the acs code.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...