Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

AAA and PPP authentication

Greetings,

I would like to set up aaa authentication for ppp authentication only for my dialup connection. Can this just be done with the:

aaa new model

aaa authentication ppp default local

Username modem password modem

Or would require additional aaa commands.

The rest of the dial up config would be something like this:

Router(config)#interface serial 3

Router(config-if)#physical layer async

Router(config-if)#encapsulation ppp

Router(config-if)#dialer in-band

Router(config-if)#dialer-group 1

Router(config-if)#async default routing

Router(config-if)#async mode dedicated

Router(config-if)#peer default ip-address pool Modemips

Router(config-if)#ppp authentication chap

Router(config)#dialer-list 1 protocol ip permit

line 1 16

speed 115200

flowcontrol hardware

modem inout

modem autoconfigure type usr_sportster

autoselect during-login

autoselect ppp

Any help or input would be great,

Thanks,

Dallas

1 REPLY
New Member

Re: AAA and PPP authentication

Hi Dallas,

You need the following commands only.

aaa new model

aaa authentication ppp default local

Username modem password modem

The rest of the dial up config would be something like this:

Router(config)#interface serial 3

Router(config-if)#physical layer async

Router(config-if)#encapsulation ppp

Router(config-if)#async default routing

Router(config-if)#async mode dedicated

Router(config-if)#peer default ip-address pool Modemips

Router(config-if)#ppp authentication chap

line 1 16

speed 115200

flowcontrol hardware

modem inout

modem autoconfigure type usr_sportster

autoselect during-login

autoselect ppp

Thanks

Sujit

160
Views
0
Helpful
1
Replies
CreatePlease to create content