Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

AAA Authorization on PIX

I have set up authentication and Authorization on the PIX. Authentication works but Authorization fails. I try to debug but nothing shows up (on PIX or ACS), but it does if I debug Authentication

1 ACCEPTED SOLUTION

Accepted Solutions

Re: AAA Authorization on PIX

Make sure you have enable authentication ,

aaa authentication ssh console TACACS LOCAL

aaa authentication telnet console TACACS LOCAL

aaa authentication enable console TACACS LOCAL

aaa authorization command TACACS LOCAL

Incase it does not work pls get aaa config

Regards,

~JG

Do rate helpful posts

4 REPLIES

Re: AAA Authorization on PIX

Make sure you have enable authentication ,

aaa authentication ssh console TACACS LOCAL

aaa authentication telnet console TACACS LOCAL

aaa authentication enable console TACACS LOCAL

aaa authorization command TACACS LOCAL

Incase it does not work pls get aaa config

Regards,

~JG

Do rate helpful posts

Community Member

Re: AAA Authorization on PIX

-aaa authentication ssh console TACACS LOCAL

-aaa authorization command TACACS LOCAL

-aaa-server TACACS (inside) host [ip_address] [key] timeout 10

Cisco Employee

Re: AAA Authorization on PIX

PIX\ASA command authorization does require enable authentication in the config.

You need to turn on enable authentication:

Here is the command

aaa authentication enable console TACACS LOCAL

HTH

Regards,

JK

~Jatin Katyal

Re: AAA Authorization on PIX

Hi Lewis,

Pls add enable authentication command to make it work.

Regards

~JG

Do rate helpful posts

176
Views
0
Helpful
4
Replies
CreatePlease to create content