Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AAA for Cat OS switch

Hi,

I having a problem on how to create a Shell command authorization for my Cat OS switches. My ACS version is 3.3

Appreciate you help

Thanks,

Jong

1 ACCEPTED SOLUTION

Accepted Solutions

Re: AAA for Cat OS switch

Jong,

Here are the CAT OS commands,

Set Based -

Console> (enable) set tacacs server [IP] [primary]

set tacacs key [key]

set tacacs attempts [number] (optional)

set localuser user [user] password [password] privilege 15

set authentication login local enable

set authentication login tacacs enable [all | console | http | telnet] [primary]

set authorization exec enable tacacs+ [deny | none] [console | telnet | both]

set authorization commands enable [config | all] tacacs+ [deny | none] [console |

telnet | both]

Here is the link for setting up command authorization , this example is for IOS but it you understand the concept, you should be able to set it up on CAT OS.

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Regards,

~JG

Do rate helpful posts

2 REPLIES

Re: AAA for Cat OS switch

Jong,

Here are the CAT OS commands,

Set Based -

Console> (enable) set tacacs server [IP] [primary]

set tacacs key [key]

set tacacs attempts [number] (optional)

set localuser user [user] password [password] privilege 15

set authentication login local enable

set authentication login tacacs enable [all | console | http | telnet] [primary]

set authorization exec enable tacacs+ [deny | none] [console | telnet | both]

set authorization commands enable [config | all] tacacs+ [deny | none] [console |

telnet | both]

Here is the link for setting up command authorization , this example is for IOS but it you understand the concept, you should be able to set it up on CAT OS.

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Regards,

~JG

Do rate helpful posts

New Member

Re: AAA for Cat OS switch

HI JG,

Wow! It works also in my CAT OS switches.

Thanks a alot,

Jong

112
Views
0
Helpful
2
Replies