I have deployed ACS 5.1 for network device access. Network Devices clock and ACS appliance clock are in sync. But still the ACS -- AAA logs timestamp is showing different time. My ACS logs dont show as per IST ( UTC +5 30 offset ) whereas my devices and ACS appliance show the correct IST time. What could be the probable reason.
Can anybody please let me know how to fix this issue.
Check the running configuration when you ssh to the ACS, it could be that the timezone isnt set there. You can issue a show timezone to see the current timezone configured and then issue a show timezones to see the listing of the timezone in the correct format that works for you. Keep in mind when you make this change it will require a restart of the acs services.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...