Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

AAA methods list on CATOS?

Hi all,

I currently have in place wired Dot1x on an IOS switch. I have the following method list configured.

AAA new-model

AAA group server radius radserv

Server XX.XX.XX.XX

AAA authentication dot1x default group radserv none

As I understand it, this config with the “none” will allow the wired users to stay connected if in the event the RADIUS servers become unavailable.

My question is how can do I do this on a CATOS switch? Can I achieve the same “fallback” method.

Thanks for any help.

1 REPLY

Re: AAA methods list on CATOS?

Hi David,

In CatOS, I think it's a bit different from IOS. It does not have the feature you're looking at, but it can be done in other way.

You probably need to play around with the supplicant (client or host) reauthentication.

http://www.cisco.com/en/US/partner/products/hw/switches/ps679/products_configuration_guide_chapter09186a008007f7c8.html#26172

Rgds,

AK

143
Views
0
Helpful
1
Replies
CreatePlease to create content