Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AAA Radius accounting command is not taking in 3750 switch

       Hi Cisco Support community,

I am facing a issue with radius accounting in Cisco 3750 switch with version 12.2. I am unable to start accounting for radius server.

This is the config that is on the switch for Radius.

aaa authentication login default group radius local

aaa authentication dot1x default group radius

aaa authorization exec my-authradius group radius if-authenticated.

radius-server attribute 6 on-for-login-auth

radius-server dead-criteria time 20 tries 5

radius-server host 10.100.1.225 auth-port 1645 acct-port 1646 key 7 14341A5801103F3904266021

radius-server host 10.100.1.226 auth-port 1645 acct-port 1646 key 7 05280E5C2C585B1B390B4406

When i try to add the following command for accounting, this is not saving.

(aaa accounting commands 0 default start-stop group radius

aaa accounting commands 1 default start-stop group radius

aaa accounting commands 15 default start-stop group radius)

If i do paste this command one by one after start-stop group it is showing only two options either tacacs+ or server, no radius option is there as well.

I  tried to create a server group and add the radius server  in the group.  Even then when i am trying to implement the aaa accounting command with the server command it is not showing in show run.

Can anyone please help me with this issue.

4 REPLIES

Re: AAA Radius accounting command is not taking in 3750 switch

I think this is normal.

"accounting commands" part works with TACACS+ only.

Try to use "accounting network" instead if that helps.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"
New Member

Re: AAA Radius accounting command is not taking in 3750 switch

Amjad,

Help me, please. The configuration works in 3560 (Version 12.2(44)SE5), but not work in 6509 (Version 12.2(50r)SYS2). Do you know why?

Thanks,

Roberto

aaa new-model

aaa group server radius net-manager
server x.x.x.x
exit
aaa authentication login default local
aaa authentication login remote-access group radius
aaa authorization network default local
aaa accounting connection infra start-stop group radius            

radius-server host x.x.x.x key xxxxxx

line vty 0 15
accounting connection infra
login authentication remote-access

New Member

Re: AAA Radius accounting command is not taking in 3750 switch

Hi,

thanks for your reply but the thing is that  i want to see the command that are being run by a user on  this particular device. If i use the network command it will only show me the  network-related service requests, including Serial Line Internet Protocol (SLIP), PPP, PPP Network Control Protocols (NCPs), and AppleTalk Remote Access Protocol (ARAP).

I have read the document from this link and it is stating that we can use command accounting. Below is the link

http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_a1.html

Can anyone please tell me if this a version issue because even in version 15.4 i was not seeing the radius option in the end

aaa accounting commands 15 default start-stop group (radius)- in radius place it was showing only Tacacs+ or group.

New Member

AAA Radius accounting command is not taking in 3750 switch

639
Views
4
Helpful
4
Replies