I've got radius authentication working on my switch, but I'm trying to allow two types of users login using Windows Active Directory. NetworkUsers who can view configuration and NetworkAdmins who can do anything. I would like for NetworkAdmins to when they login go directly into privilege level 15 but cant get that part to work. Here is my setup:
Windows 2008 R2 Domain controller with NPS installed.
Radius client: I have the IP of the switch along with the key. I have cisco selected under the vendor name in the advance tab
NetworkAdmins which has the networkadmin group under conditions and under settings i have nothing listed under Standard and for Vendor Specific i have :
Cisco-AV-Pair Cisco shell:priv-lvl=15
My switch config:
aaa new-model ! ! aaa group server radius MTFAAA server name dc-01 server name dc-02 ! aaa authentication login NetworkAdmins group MTFAAA local aaa authorization exec NetworkAdmins group MTFAAA local
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...