Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

About Web Authentication with Automatic MAC Check issues

I try to set the ACS4.2 to be able to use Web Authentication with Automatic MAC Check feature on 2960,I set user account and password(PC MAC Address)in ACS internal Dataase,but it doesn't work.

I view ACS log,it appears the ACS password invalid message,then I tried to modify password format is as follows, but did not succeed.Please help me solve this problem,thank you!

ACS password example:

1. 0011.2233.aabb

2. 00112233aabb

3. 0011.2233.AABB

4. 00112233AABB

5. 00-11-22-33-aa-bb

6. 00-11-22-33-AA-BB

LAB equipment:

1. 2960-24TT-L Switch with IOS 12.2(46SE)

2. ACS 4.2 Trail version for windoows 2003

1 REPLY
Cisco Employee

Re: About Web Authentication with Automatic MAC Check issues

Would recommend using web-authentication as a fallback method to 802.1X.

See here:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_46_se/configuration/guide/sw8021x.html#wp1274792

There's no MAC-check at all in this case, and if you want to check MAC-addresses, then you can enabled MAC-Auth separately as well.

Hope this helps,

188
Views
0
Helpful
1
Replies
CreatePlease login to create content