Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Access level to a user on Network Device group

Hi,

1. In ACS is it possible to give Readwrite access to an user when he logs in to a Network device group and readonly access when he logs in another network device group.

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Access level to a user on Network Device group

Hi,

You need to set up Command Authorization Set on a per Network Device Group Basis

Assign a Shell Command Authorization Set on a per Network Device Group Basis-Associates particular shell command-authorization sets to be effective on particular NDGs.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/GrpMgt.html#wp480029

Regards,

~JG

3 REPLIES

Re: Access level to a user on Network Device group

In the access restrictions section located in group setup tab, for the specific user-group, you would be able to set the permission. There will be a section enable options wherein you can specify permission for each each device or each network device group.

Re: Access level to a user on Network Device group

Hi,

You need to set up Command Authorization Set on a per Network Device Group Basis

Assign a Shell Command Authorization Set on a per Network Device Group Basis-Associates particular shell command-authorization sets to be effective on particular NDGs.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/GrpMgt.html#wp480029

Regards,

~JG

New Member

Re: Access level to a user on Network Device group

Hi all,

We have successfully configured the User level access to different network device groups. this was accomplished by configuring different network device and Shell command authorization set.

Thanks for all your help.

123
Views
0
Helpful
3
Replies