Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

access switch and ap's for BYOD

good day,

i'm reading the BYOD document and found out that the switch and ap's below are the only listed on their designed, does it mean normal 3560's and 11xx AP's series can't support BYOD solution using ISE? could someone confirm please?

cat switches:

Catalyst 3750-X

Catalyst 3560-X

Catalyst 4500E Sup7-E

AP's

AP3502

AP3602

thanks in advance for your input.

cheers,

mhon

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions

access switch and ap's for BYOD

The 3560s that can run the code specified in this chart should be able to support ISE -

http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp55038

The APs that can support the controller code in the above guide show work as well, however if you want to run the AP in standalone mode, and they do not support features such as CoA then you will have to dedicate an inline posture node in order to get the full features of Cisco ISE.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
1 REPLY

access switch and ap's for BYOD

The 3560s that can run the code specified in this chart should be able to support ISE -

http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp55038

The APs that can support the controller code in the above guide show work as well, however if you want to run the AP in standalone mode, and they do not support features such as CoA then you will have to dedicate an inline posture node in order to get the full features of Cisco ISE.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
494
Views
0
Helpful
1
Replies
CreatePlease login to create content