Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Access Switches compatibility with ISE

Hi all,

i need some advise on models of switches to buy to support almost every feature that the ISE offeres... Mainly...

MAB, 802.1x, Web Auth, CoA, dACL, SGA...

Now, I have reviewed the Cisco 2960 switches and the product datasheets advise that they support certain features, but then when I look at the Cisco ISE Network Access Device compatibility list which was updated in December 2013... When looking under Cisco 2960, it advises that they only support 802.1x, & MAB???

I am planning for future rollout of ISE features to the Access switches in our network but need to ensure that A) existing switches support such features and B) new switches we purchase will support such features.

Is there a more accurate document available, or has anyone had experience with the current Cisco 2960 switches and how well they work with the ISE?

Thanks

Mario                  

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Access Switches compatibility with ISE

Have a look at this link instead:

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/compatibility/ise_sdt.html

dACLs, WebAuth (both local and central) are definitely supported. SGA/SGT is not though...

Thank you for rating!

Thank you for rating helpful posts!
3 REPLIES
Cisco Employee

Access Switches compatibility with ISE

Hi,

Please have a look at the following link, This is a more accurate and detailed doc for cisco 2960 series switches.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/data_sheet_c78-728232.html

New Member

Re: Access Switches compatibility with ISE

Hmmm, looks like WebAuth, SGA and dACLs are not supported then.



Sent from Cisco Technical Support iPhone App

Cisco Employee

Re: Access Switches compatibility with ISE

Have a look at this link instead:

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/compatibility/ise_sdt.html

dACLs, WebAuth (both local and central) are definitely supported. SGA/SGT is not though...

Thank you for rating!

Thank you for rating helpful posts!
230
Views
0
Helpful
3
Replies
CreatePlease login to create content