Access Switches compatibility with ISE

[marioderosa2008]

Hi all,

i need some advise on models of switches to buy to support almost every feature that the ISE offeres... Mainly...

MAB, 802.1x, Web Auth, CoA, dACL, SGA...

Now, I have reviewed the Cisco 2960 switches and the product datasheets advise that they support certain features, but then when I look at the Cisco ISE Network Access Device compatibility list which was updated in December 2013... When looking under Cisco 2960, it advises that they only support 802.1x, & MAB???

I am planning for future rollout of ISE features to the Access switches in our network but need to ensure that A) existing switches support such features and B) new switches we purchase will support such features.

Is there a more accurate document available, or has anyone had experience with the current Cisco 2960 switches and how well they work with the ISE?

Thanks

Mario                  

[Muhammad Munir]

Hi,

Please have a look at the following link, This is a more accurate and detailed doc for cisco 2960 series switches.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/data_sheet_c78-728232.html

[marioderosa2008]

Hmmm, looks like WebAuth, SGA and dACLs are not supported then.



Sent from Cisco Technical Support iPhone App

[nspasov · Accepted solution]

Have a look at this link instead:

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/compatibility/ise_sdt.html

dACLs, WebAuth (both local and central) are definitely supported. SGA/SGT is not though...

Thank you for rating!