Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Access to the Switch when the tacacs+ is down

How can i access the Switch in the case that the Switch lose conectivity with the Tacacs+ Server?

The AAA Configuration of the Switch is the following:

#authentication

set authentication login tacacs enable console primary

set authentication login tacacs enable telnet primary

set authentication enable tacacs disable console

set authentication enable tacacs disable telnet

set authentication login radius disable console

set authentication login radius disable telnet

set authentication enable radius disable console

set authentication enable radius disable telnet

set authentication login local enable console

set authentication login local enable telnet

set authentication enable local enable console

set authentication enable local enable telnet

Note:

This Catos version doesn't support to create local users.

1 REPLY
New Member

Re: Access to the Switch when the tacacs+ is down

gfullage - CISCO SYSTEMS, CCIE

Nov 27, 2003, 5:04pm PST

This should help you out:

http://www.cisco.com/en/US/tech/tk583/tk642/technologies_tech_note09186a0080094ea4.shtml

Specifically, look at the first dot-point in Step A, this tells you exactly what you're after.

156
Views
0
Helpful
1
Replies
CreatePlease login to create content