Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

ACE30 Module 4.2 Integrating with ACS 5.2

Hi,

I am using ACE30 having s/w version: 4.2. I am using ACS 5.2

I have used the below commands to add ACE with ACS for AAA.

===================================================================

tacacs-server key 7 "nacs0wvd!q"

tacacs-server host 96.86.76.66 key 7 "nacs0wvd!q"

tacacs-server host 96.86.76.67 key 7 "nacs0wvd!q"

aaa group server tacacs+ NOC

  server 96.86.76.66

  server 96.86.76.67

aaa authentication login default group NOC

aaa authentication login console local

aaa accounting default group NOC

===================================================================

I am getting authenticated by ACS, but the problem is authorization is not happening. In ACS, i have just added the device IP using TACACS+.

Kindly suggest.

417
Views
0
Helpful
0
Replies
CreatePlease to create content