ACS 2.6 and PIX command authorization

[dladen]

Can I use ACS2.6 for PIX 6.2.2 command authorization. I used "Cisco - Authentication and Command Authorization for PIX 6.2" as my reference. The doc talks about needing a patch for ACS3.0. Is there a need for a similar patch in ACS2.6

Thanks

[tepatel]

You can see that if you have ACS 3.0 then only you need a patch due to bug CSCdw78255 which is found in 3.0(1). Since CSCdw78255 is not reported against 2.6, you don't need any patch for that

[dladen]

i turned the page in the documenation and saw that forgot to add aaa authorization command TACSERVER command. Once entered, it worked fine.