I configured the ACS to allow PEAP Machine Authentication.
Machine Access Restriction is also set to use de <No Access> group in case one of the authentication methodes are not ok.
When computer (member of domain) boots and shows login window, the computer authenticates with computer name. Logs in ACS show successfull machine authentication.. You can even ping the wireless computer..
Then I log in with a valid user ID and password...
No access to wireless network. Log shows error code: Denied Access Due to Machine Access Restriction.
Machine authentication is ok, user authentication is ok. Why do I get a Denied Access ?
Cisco Secure Access Control Server (ACS) Solution Engine supports many RADIUS attributes. You can enable different attribute-value (AV) pairs for IETF RADIUS and for any supported vendor. This appendix lists the standard attributes, vendor-proprietary attributes, and vendor-specific attributes supported by Cisco Secure ACS.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...