acs 4.1 appliance and authentication of cisco 1200 access points.
Our company has 17 access points (1200) connected in our meeting rooms. Recently we purchased an ACS appliance to authenticate this access points. I would like to do this using uername&password(local database) and mac address authentication. is t possible ? or whether I have to use a certification server for this purpose.? Configuring each access point with certicates is a difficult task .one engineer told me that cisco acs appliance dosent support username password and mac address combination. please clarify. If there is a documentation for this please referto the same too.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...