Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

ACS-4.1 - doesn't display Radius(Nortel) in Interface configuration

We have one ACS running over Windows that we can see the Radius(Nortel) option in Interface Configuration.

Have anyone treated with this issue?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ACS-4.1 - doesn't display Radius(Nortel) in Interface config

That is probably because you have no AAA device configured for Radius (Nortel). IF you configure one, it will appear in the interface configuration

Nicolas

===

Don't forget to rate answers that you find useful

2 REPLIES
Cisco Employee

Re: ACS-4.1 - doesn't display Radius(Nortel) in Interface config

That is probably because you have no AAA device configured for Radius (Nortel). IF you configure one, it will appear in the interface configuration

Nicolas

===

Don't forget to rate answers that you find useful

Re: ACS-4.1 - doesn't display Radius(Nortel) in Interface config

Hi Nicolas,

You are right.

It is useful.

Thanks for your tip.

220
Views
5
Helpful
2
Replies
CreatePlease login to create content