Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACS 4.1 integration with Nexus 7010

Nexus 7010 could be integrated using shell profiles on the ACS 5.0 and above. Could the same be achived on the ACS 4.1, if yes than how ? I am using Nexus 6.1.2.

4 REPLIES
Silver

ACS 4.1 integration with Nexus 7010

Hi Ankit,

  Yes, You can integrate Nexus with ACS 4 as well.  You will have to add this custom attribute either in the group setup or user setup.

you pass back a TACACS custom attribute with a       value of roles="roleA". For a full access user,       you use:       cisco-av-pair*shell:roles="network-admin"

cisco-av-pair*shell:roles="network-admin"(The
      * makes it optional)

shell:roles="network-admin"

Let me know if you have further questions:

Best Regards:

Minakshi (Do rate the helpful posts )

New Member

ACS 4.1 integration with Nexus 7010

Hi MinKumar,

I have an NXOS image of 6.1. Which researching on the subject which is pretty straight on ACS 5.0 and above I stumbled on one of the engineer's commet that the supervisor crashed. The engineer did not post the configuration as to ascertain what caused the crash but logs did suggested the supervisor crash.

And below Javed also suggests the same. Curious if the ACS 4.1 version could intergarte with NX0S 6.1 ?

Regards

Ankit

New Member

ACS 4.1 integration with Nexus 7010

Hi Minakshi,

Furthur to your attention check this link.

https://supportforums.cisco.com/thread/2142430

In your reply above when you say integration is achievable than to which nxos code supports it ?

Regards

Ankit

Bronze

ACS 4.1 integration with Nexus 7010

The Cisco Secure Access Control Server Release 4.1, hereafter referred to as ACS, works with hundreds of devices. This device list might significantly differ from the device lists associated with other Cisco products. ACS 4.1 does not integrate with Nexus 7010.  No information found in the above mentioned list

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/device/guide/sdt42.pdf

ACS 5.2 supports the nexus 7010 switches and can integrate with them. For complete devices list and features please check this link:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/device/guide/sdt42.pdf

350
Views
0
Helpful
4
Replies