Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACS 4.2 and ATA186

Hello,

Am having trouble with Cisco ATA device when port are configured to use ACS.

When i activate the needed parameter on the port, the ATA device ( voice Vlan ) stop responding to ping.

i need to remove the config and then the device replys to ping but the web interface is still not working, i need to power off the device.

Is there something special to do for port with a ata186 connected to it? any doc?

this is the conf on the port:

switchport mode access

switchport access vlan 175

authentication event fail action authorize vlan 175

authentication event no-response action authorize vlan 175

authentication port-control auto

authentication periodic        

authentication violation protect

authentication timer reauthenticate 3600

dot1x pae authenticator

dot1x timeout quiet-period 5

dot1x timeout server-timeout 15

dot1x max-req 10

dot1x max-reauth-req 10

dot1x timeout auth-period 60

The ATA info:

S/W Version3.02.04(090202A)
H/W Version0x0010 0x0000
Serial NumberINM09061MYC
Product IDATA186I1-A
H/W Features0x00000016
FirmwareATA030204SCCP090202A.zup
VLAN ID100
Config Fileata001360399037

Everyone's tags (3)
528
Views
0
Helpful
0
Replies