Due to some wrong access policy applied in the administration control settings. GUI access is not fucntioning. So we need to take a backup thru CLI mode using FTP server. I have tried using the backup command in the console & taken the backup using the following steps. But the backup file is less than 1kb. does any one have any idea how to resolve the issue. I need the exact Db backup to be taken.
Step 1 Log in to the ACS SE. For more information, see Logging In to the Solution Engine from a Serial Console.
Step 2 At the system prompt, enter backup and press Enter.
Tip You can enter the following parameters after the command or in response to subsequent prompts: [server] [username] [filepath]
Step 3 At the Enter FTP Server Hostname or IP Address: prompt, enter the FTP server IP address or hostname, and press Enter.
Step 4 At the Enter FTP Server Directory: prompt, enter the FTP server directory pathname, and press Enter.
Step 5 At the Enter FTP Server Username: prompt, enter the FTP server username and. press Enter.
Step 6 At the Enter FTP Server Password: prompt, enter the FTP server password and, press Enter.
Step 7 At the File: prompt, enter the name that you want to give the backup file, and press Enter.
Step 8 At the Encrypt Backup file? <Y or N>: prompt, enter Y to encrypt the backup file or N not to encrypt it, and press Enter. Caution This procedure interrupts the use of the ACS SE for AAA services.
Step 9 If you entered Y to encrypt the backup file, at the Encryption Password: prompt, enter a password and then press Enter.
Result: The console displays:
Backing up now . . .
All running services will be stopped and restarted automatically.
It was working with https only. I will explain much more in detail. in the adminstartion control access policy there is an option to specify the list of subnets or IP address range alone to access the ACS application. In that our engineer selected allow only specific IP range option and submitted without mentioning any ip address range. So its not allowing ACS application access from any IP range. So ACS is serving authentication for existing radius/tacacs users. but nt able to access the acs application for adding/deleting users.
Also i have tried both encrypted and unencrypted backups. but the result is same.
Please suggest for any other method to recover or backup....
DocumentationCode download linksGoalRequirementLimitationsSupported ISR
and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity
options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in
HA DocumentationCode download linksGoalRequirementLimitationsSupported
ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationCo...
Question I am currently unable to specify "crypto keyring" command when
configuring VPN connection on my cisco 2901 router. The following
licenses have been activated on my router :