Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACS 4.2 Reimage failed: 1 DURING RECOVERY FROM CD recovery


Cisco Secure ACS: 4.2.0.124

Appliance Management Software: 4.2.0.124
--------------------------------------
Acs Appliance Recovery Options

  [1] Reset administrator account
  [2] Restore hard disk image from CD
  [3] Exit and reboot

Enter menu item number: [2]

This operation will completely erase the hard drive.
Press 'Y' or 'y' to confirm, any other key to cancel:y

Please wait while Cisco Secure ACS image is restored.
This might take several minutes ..

Reimage failed: 1

Can anybody help me ? i can't recover my ACS.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ACS 4.2 Reimage failed: 1 DURING RECOVERY FROM CD recovery


Cisco Secure ACS: 4.2.0.124

Appliance Management Software: 4.2.0.124
--------------------------------------
Acs Appliance Recovery Options

  [1] Reset administrator account
  [2] Restore hard disk image from CD
  [3] Exit and reboot

Enter menu item number: [2]

This operation will completely erase the hard drive.
Press 'Y' or 'y' to confirm, any other key to cancel:y

Please wait while Cisco Secure ACS image is restored.
This might take several minutes ..

Reimage failed: 1

Can anybody help me ? i can't recover my ACS.

Thanks

Hi,

Just check the cd is bootable one and should have all the relevant image files for ACS 4.2.

HTH

Ganesh.H

1 REPLY

Re: ACS 4.2 Reimage failed: 1 DURING RECOVERY FROM CD recovery


Cisco Secure ACS: 4.2.0.124

Appliance Management Software: 4.2.0.124
--------------------------------------
Acs Appliance Recovery Options

  [1] Reset administrator account
  [2] Restore hard disk image from CD
  [3] Exit and reboot

Enter menu item number: [2]

This operation will completely erase the hard drive.
Press 'Y' or 'y' to confirm, any other key to cancel:y

Please wait while Cisco Secure ACS image is restored.
This might take several minutes ..

Reimage failed: 1

Can anybody help me ? i can't recover my ACS.

Thanks

Hi,

Just check the cd is bootable one and should have all the relevant image files for ACS 4.2.

HTH

Ganesh.H

852
Views
0
Helpful
1
Replies