I am trying to setup authentication of VPN users using RADIUS.I have ACS version 184.108.40.206
In first step I configured VPN using local database of users. Got that to work find. Later, I configured RADIUS server and run test aaa-server authentication ..... Got successful authentication message on ASA.
Now I am trying to combine the two and have no luck.I did debug on ASA and found that my AAA server is Down. I doubt about the ASA and ACS integration or there is some operability issue. I have checked all my configuration.
group-policy testacs internal group-policy testacs attributes dns-server value x.x.x.x vpn-tunnel-protocol IPSec webvpn default-domain value abc.in
tunnel-group testacs type remote-access tunnel-group testacs general-attributes address-pool testacs-acs-pool authentication-server-group NEWACS5.1 LOCAL default-group-policy testacs password-management tunnel-group testacs ipsec-attributes pre-shared-key *
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...