Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACS 5.1 integration with WLC

Hi,

can some one help me in finding a document for ACS 5.1 appliance, TACACS+ integration (configuration) with my WLC. also RADIUS configuration for clients.

all Wireless controller configuration documents shows only acs 4.x integration.

Thanks in advance

Everyone's tags (3)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: ACS 5.1 integration with WLC

Hi,

Unfortunately there is no official configuration example for this as of now.
You can haowever refer to these screenshots that I took from a lab example, to configure the shell profile and pass it back as a result of the authorization rule.

Hope this helps,

Fede


--
If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

Cisco Employee

Re: ACS 5.1 integration with WLC

Hi,

For 802.X authentication, I don't have any screenshots as of now.
But you can always refer to the following chapter in the ACS 5 configuration guides:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/policy_mod.html

Regards,

Fede

--
If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

3 REPLIES
Cisco Employee

Re: ACS 5.1 integration with WLC

Hi,

Unfortunately there is no official configuration example for this as of now.
You can haowever refer to these screenshots that I took from a lab example, to configure the shell profile and pass it back as a result of the authorization rule.

Hope this helps,

Fede


--
If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

New Member

Re: ACS 5.1 integration with WLC

Thanks for sharing the screenshot.

This is for the WLC and ACS via TACACS+ configuration right ?

if you have screenshot forRADIUS based configuration for users kindly share the same,

we are implementing 802.1x for users, we are planning for SSID based restrictions, if you have any screenshot for the same please share.

Cheers,

Cisco Employee

Re: ACS 5.1 integration with WLC

Hi,

For 802.X authentication, I don't have any screenshots as of now.
But you can always refer to the following chapter in the ACS 5 configuration guides:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/policy_mod.html

Regards,

Fede

--
If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

1462
Views
10
Helpful
3
Replies