04-10-2012 12:59 AM - edited 03-10-2019 06:59 PM
Hello,
I want to install cumulative patch 9 for Cisco ACS 5.2.0.26
I found installation guide:
http://www.cisco.com/web/software/282766937/37718/Acs-5-2-0-26-9-Readme.txt
Instructions on how to install the patch ========================================
1. open CLI console
2. define new repository in which the 5-2-0-26-9.tar.gpg resides
3. issue: 'acs patch install 5-2-0-26-9.tar.gpg repository YOUR_REPOSITORY'
We have configured 2 ACS appliances in "Split ACS Deployment"
How to install cumulative patch on 2 servers?
If I install on primary server, does the patch replicate on secondary?
Thanks for your help,
Patrick
Solved! Go to Solution.
04-10-2012 06:12 AM
Patrick,
Patch needs to be install on both ACS saprately via CLI. It will not replicate.
Regards,
~JG
Do rate helpful posts
04-11-2012 12:21 AM
There is no need to deergister the secondary server. Can run with different patch versions for release
This would not work with running with two different releases (5.2 versus 5.3) in which case would need to be deregistered
04-10-2012 06:12 AM
Patrick,
Patch needs to be install on both ACS saprately via CLI. It will not replicate.
Regards,
~JG
Do rate helpful posts
04-10-2012 06:41 AM
Thanks for your answer
Best regards,
Patrick
04-11-2012 12:17 AM
Does secondary server need to be deregistered before patch installation ?
Regards,
Patrick
04-11-2012 12:21 AM
There is no need to deergister the secondary server. Can run with different patch versions for release
This would not work with running with two different releases (5.2 versus 5.3) in which case would need to be deregistered
04-11-2012 12:24 AM
Thanks a lot for your (very) quick answer
Best regards,
Patrick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide