Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACS 5.3 mac filtering for WLC clients

Hello

Does anyone have an upto date reference for setting up the ACS v 5.3 for mac filtering via built in radius with wireless lan controllers?

all I seem to find is this old document - which uses the user database.

the ACS 5.3 has host store, which seems like the logical place to setup mac address information

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml

Cheers

2 REPLIES

ACS 5.3 mac filtering for WLC clients

Simon,

Here is the guide on how to configure the mac addresses - http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/users_id_stores.html#wp1052914

Basically you can create a service selection rule that will use the internal hosts, and your rule can combine the service-type=call check and network device group = wireless controllers.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*
New Member

Hello everybody,

Hello everybody,

i can say i get nearly the same problem. but mine is about filtering mac address connexion from switch port  with cisco ACS 5.3 .

i've already configured Device port filtering in the ACS SERVER, but i need help to set mac address filtering.

thank you for helping.

YESHUAWEN

3021
Views
5
Helpful
2
Replies
CreatePlease to create content