Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACS 5.4 DACL is not working.

                   We are trying to configure downloadable ACL on ACS 5.4 for wireless users with [WPA2][Auth(802.1X)] authentication. Users are able to authenticate with ACS 5.4 server even in authentication log it is showing configured DACL is getting applied but applied acl is not taking effect on user i.e we have confgured some restrictions in DACL still user is able to access everything.

Attache is the screenshot of passd authentication with DACL.

Need assistance for the same.

4 REPLIES
Cisco Employee

ACS 5.4 DACL is not working.

The screen shot shows that DACL being pushed from the ACS. I'd like to check if you've "AAA OVERRIDE" option enabled under WLC > WLAN > edit > Advanced > AAA Override.

~BR
Jatin Katyal

**Do rate helpful posts**

~BR Jatin Katyal **Do rate helpful posts**
New Member

ACS 5.4 DACL is not working.

Yes AAA Override option is already selected in WLC.

Cisco Employee

ACS 5.4 DACL is not working.

Yusuf,

Please verify if you've configured in the same way.

Policy Elements > Network Access > Authorization Profile, please use the following configuration:

Dictionary Type: Radius-Cisco Airespace

Attribute name: Airespace-ACL-NAme

Attribute Type: String

Value=ACL-WLC ( This would be the name of the ACL that you've created on the WLC)

ACLs on Wireless LAN Controller Configuration Example

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807810d1.shtml#conf

~BR
Jatin Katyal

**Do rate helpful posts**

~BR Jatin Katyal **Do rate helpful posts**
Silver

ACS 5.4 DACL is not working.

546
Views
0
Helpful
4
Replies
CreatePlease to create content