Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACS 5.4 to ISE 1.2 migration

Hi,

does somebody have an idea how to migrate users from ACS 5.4 to ISE?

I tried with migtool, but it's telling me that migration from ACS 5.4 is not supported.

However if I install older ACS 5.1 and restore a backup from ACS 5.4 then it fail because it doesn't match installed application.

I don't want to use backup from older ACS as we put since that time so many users ...

Thanks for any hint.

Karel

Everyone's tags (5)
8 REPLIES
Bronze

ACS 5.4 to ISE 1.2 migration

Case Solution:

Please check the below guide for ACS to ISE 1.2 Migration. It will helpful for you.

http://www.cisco.com/en/US/docs/security/ise/1.2/migration_guide/ise_mig_guide.pdf

New Member

ACS 5.4 to ISE 1.2 migration

As I wrote ... we are running ACS 5.4 and it's impossible to use backup from 5.4 to import on 5.3.

So the Migration guide is currently not helpfull at all.

Re: ACS 5.4 to ISE 1.2 migration

Hi Karel,

As I see this is not supported so far. What you can do is to export your users from 5.4 and import them on 5.3 then proceed with the backup and migration process.

If you still need to go with 5.4 you better communicate the TAC. They may help you better (they may probably have a patch to fix the issue with the migration from 5.4 to ISE).

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

Rating useful replies is more useful than saying "Thank you"
Cisco Employee

Re: ACS 5.4 to ISE 1.2 migration

There's no way to migrate from ACS 5.4 to ISE at this time, even with TAC.

New Member

Is there a way now to migrate

Is there a way now to migrate from ACS 5.4 to ISE 1.2?

Cisco Employee

Looks like 5.4 was left in

Looks like 5.4 was left in the dust. 

 

5.3 to 1.2 is supported

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/migration_guide/ise_migration_guide/ise_mig_overview.html

 

With ISE 1.3, 5.5 and 5.6 to 1.3 is supported

http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/migration_guide/b_ise_MigrationGuide/b_ise_MigrationGuide12_preface_00.html

Cisco Employee

Re: ACS 5.4 to ISE 1.2 migration

It is not supported you cannot migrate from ACS 54. to ISE 1.2.

Cisco Employee

Hi,The migration from ACS 5.4

Hi,

The migration from ACS 5.4/5.5 to ISE will be supported in ISE 1.3 which is about to be release.

Thanks,

Naresh

1051
Views
4
Helpful
8
Replies